Solved rgh 1.2 help

[Caps Lock]

hey guys I wanna start by saying my
"o" is brken.... anyways I need help.

RGH 1.2 will not work all it does is flash green over and over and does not boot.

Pics:

 

[Hypotoad]

What console is it and did you write the nand with Glitch2?

What chip are you using and what file did you program it with?

 

[HuskerHeaven]

hey guys I wanna start by saying my
"o" is brken.... anyways I need help.

RGH 1.2 will not work all it does is flash green over and over and does not boot.

Pics:

You need to try all the different timing files. There's something like 20 of them. Start with the try these first, then move onto the If your mad folder.

 

[Caps Lock]

You need to try all the different timing files. There's something like 20 of them. Start with the try these first, then move onto the If your mad folder.

So that's all it is

 

[HuskerHeaven]

So that's all it is

If you getting two 2 and 1 long flash or 3 short flashes, it means it's attempting to glitch, just the wrong timing. So yea.

 

[Caps Lock]

If you getting two 2 and 1 long flash or 3 short flashes, it means it's attempting to glitch, just the wrong timing. So yea.

No it just flashes green like repeatedly snd no glitch

 

[HuskerHeaven]

No it just flashes green like repeatedly snd no glitch

Have you tried all 20-30 files.

 

[Caps Lock]

Have you tried all 20-30 files.

I'm ding it nw seems like it does the same thing just keeps flashing green repeatedly

 

[Caps Lock]

I've almost tried all files and it keeps flashing green fast and repeatedly any ideas please

 

[Caps Lock]

 
that's what its d0ing

 

[Hypotoad]

Check your wiring, go over the solder points with a DMM to make sure there are no shorts. Also check out what settings you have on your Rev C, set the jumper to 2 -3 near where you solder the wires and try not having the cap enabled.

 

[Caps Lock]

Check your wiring, go over the solder points with a DMM to make sure there are no shorts. Also check out what settings you have on your Rev C, set the jumper to 2 -3 near where you solder the wires and try not having the cap enabled.

I don't have one of those and I'm using a rev d and if u look up I have some pictures of my soldering do it should be good hehe and I will try that in a second

 

[Hypotoad]

I don't have one of those and I'm using a rev d and if u look up I have some pictures of my soldering do it should be good hehe and I will try that in a second

Are you using the on board clock or did you disable it?

Check this out:

http://www.teamx360.co.uk/showthread.php?3772-Falcon-RGH1-2-Instant-Boot-(Rev-D)-Install-Guide

 

[szymonm2]

I have the same issue with a rev.c coolrunner and my falcon using rgh 1.2. I tried like 10 different timing files but it wont work -_-

 

[Caps Lock]

Are you using the on board clock or did you disable it?

Check this out:

http://www.teamx360.co.uk/showthread.php?3772-Falcon-RGH1-2-Instant-Boot-(Rev-D)-Install-Guide

I lifted pad c I hate these cheap things

 

[DODOALITTLE]

having the same issue blinks twice fast and 1 kinda long one. Is it this trying to glitch i tried multiple timing files and still nothing. here a video