What's new

Solved Reflow question

  • Thread starter HackTehMod
  • Start date
  • Views 177
H

HackTehMod

Newbie
Messages
50
Reaction score
0
Is the board supposed to have smoke coming off it when it isbeing reflowed? and what parts should i reflow to fix 3rrod
 
C

Chips 98

Getting There
Messages
1,366
Reaction score
174
you should have done the x-clamp repair first. and no you should not see smoke and the cpu and gpu is what you should reflow
 
2

204 Modz

Mooo
Messages
425
Reaction score
35
Is the board supposed to have smoke coming off it when it isbeing reflowed? and what parts should i reflow to fix 3rrod
only i little bit if you applied flux, otherwise your probably burning and the GPU its the chip under the flat heatsing
 
F

FezLightning

Enthusiast
Messages
61
Reaction score
6
You'll definitely see some if you used flux, and a very small amount is ok even if you didn't. Solder tends to smoke when it melts, so it's a good sign, to an extent.
 
Top Bottom