What's new

Solved Reflashing the nand

  • Thread starter juthegame
  • Start date
  • Views 217
J

juthegame

Newbie
Messages
89
Reaction score
1
I have two xboX 360 which are Corona of which one is a 4gb which has a coolrunner rev d and the other is a 250gb which has a x360 ace are rgh.
unfortunately the 4gb is switching on the green light on the coolrunner is fladflas as normal but it doesn't boot at all.
The 250gb the x360 ace some of the components got burnt,so it doesn't boot.
I asked for help I was told to reflash the the nand and program the coolrunner rev d.
My question is how do I reflash the Nand,do I have to do the whole rgh process from scratch because I have the jrunner,cool coolrunner rev d and the Nand x?
 
N

Newsk

Contributor
Messages
2,519
Reaction score
331
On the 4gb corona you will need to either make a reader out of an old as card adapter like this
icjMNzr.jpg
NG9WYuU.jpg

Or get the TX 4gb nand r/w kit . (There are other solutions availabke as Well )
Either way u will need a cheap usb card reader to attach them to on your pc.

Some examples
TX kit modified for repeated use
4WLxCSB.jpg



cmUrnbU.jpg
xDtIgRQ.jpg
 
Last edited:
X

X1337XSNIP3R

Enthusiast
Messages
324
Reaction score
13
Or you can just go to the store.weekendmodder.com and get his nand tool its really easy to use and they are not that small of points. He has tuts on there also
 
N

Newsk

Contributor
Messages
2,519
Reaction score
331
Or you can just go to the store.weekendmodder.com and get his nand tool its really easy to use and they are not that small of points. He has tuts on there also
True . just depends on if your the diy type or not.
Oh your talking about modshops.co 's little board . Looks pretty handy .
 
Top Bottom