Red Ring of Death.

Discussion in 'Xbox 360 Support Archive' started by joshXxXpwns, Dec 19, 2008 with 6 replies and 443 views.

Thread Status:
Not open for further replies.
  1. joshXxXpwns

    joshXxXpwns Enthusiast

    Messages:
    32
    Ratings:
    0
    I've already cleaned the CPU and GPU and replaced the heat sinks TIGHTLY..

    Still..

    RRoD!!

    Any Ideas??

     
  2. Xpargas

    Xpargas Seasoned Member

    Messages:
    5,271
    Ratings:
    1,303
    X-clamp doesnt always work
     
  3. NakedZombo

    NakedZombo Member

    Messages:
    294
    Ratings:
    49
    Don't screw in the heat sinks to tight or to loose.
     
  4. Randy Parrish

    Randy Parrish Newbie

    Messages:
    1
    Ratings:
    0
    I have already fixed the three lights and now the bottom right light comes on
     
  5. T Sizzles

    T Sizzles VIP VIP

    Messages:
    6,032
    Ratings:
    324
    You probably have a 0022, which is a bad solder connection between the pins on the bottom of the GPU and the motherboard. The only way to permanently fix that is to reflow the solder. Unless you have a $10k BGA reballing machine, look on eBay. Some people do it for $30 or so.

    But find the secondary error code and post it before you do anything else.
     
  6. OP
    joshXxXpwns

    joshXxXpwns Enthusiast

    Messages:
    32
    Ratings:
    0
    No error code comes up on the screen.

    So I'm not sure.
     
  7. T Sizzles

    T Sizzles VIP VIP

    Messages:
    6,032
    Ratings:
    324
    The secondary error code when you press the controller sync and eject button.
    Do that and post the 4-digit code here.
     
Thread Status:
Not open for further replies.