What's new

Discussion Rapid Fire Controller (no chip)

  • Thread starter ukrides
  • Start date
  • Views 2,674
Status
Not open for further replies.
U

ukrides

Enthusiast
Messages
200
Reaction score
18
Points
70
Sin$
0
I posted this back on acidmods when I used to be a member its a rapid fire method with no chip required it works quite well :biggrin: ( sorry for bad quality photos and there size I directly copied from acidmods :biggrin: )

heres the tut

ok so i was talking to my mate who plays cod on pc and how people switch shoot to the scroll so i thought hey why dont i have that on my xbox so i wired up a a mouse scroller to trigger and it worked
biggrin.gif


NOTE YOU WILL NEED TO FIND A SCROLL WHEEL LIKE THIS

qyy8eq.jpg

and be careful i snapped plastic end and had to use allen key replacement centre piece :tongue:


I cut this hole by first drilling a hole and then filed it to the shape i needed now each mouse scroller will be different I personally used the mouse and copied the hol
where the mouse wheel was before
biggrin.gif

2yjv4nq.jpg

25iw27s.jpg


next check that the scroller fits and rolls
birlsi.jpg


if thats all done now take the scroller and bend down the flaps mine came like this be carful and do what I did
biggrin.gif


firstly your scroll wheel should look like this if different then im not sure
s4d.gif


qyy8eq.jpg


next the wheel should slide out from switch bit so do so

zvtpcj.jpg


after you have done that now you can bend the flaps down with out damaging wheel DO NOT BEND DOWN THREE CONNECTOR POINTS !!!! incase you snap them !!

29pdt7k.jpg


then reconnect wheel and see if it fits i will be mounting mine to the gray bottom piece with hot glue when im done so check that you can.

314sd5f.jpg


next i hot glued it make sure you do not glue the mechnaism
141l43q.jpg



next you need to wire it to these points
200uzwz.jpg


just wire the two points on the scroll to that or you can wire what i did with a switch on the back so i can choose to have it on and off as there is some auto fire issues atm.

312vhus.jpg



( the hardest part about this mod is making the hole and finding a scroll wheel like the one i used :tongue: but I like the result as it undectable as the faster you can scroll the faster you can shoot and with devlopment such as free rolling scroll wheels will mean this may be able to moved onto bigger and better devlopments : )


thanks

ukrides
 
204 Modz

204 Modz

Mooo
Messages
425
Reaction score
35
Points
85
Sin$
0
smart idea but how is ti scrolling to shoot? i think it would be a bit uncomfortable.
 
U

ukrides

Enthusiast
Messages
200
Reaction score
18
Points
70
Sin$
0
VG05 said:
whered you get your scroll wheel
it was just out of an old mouse some mice dont have them so you have to work round em

blagger1 said:
smart idea but how is ti scrolling to shoot? i think it would be a bit uncomfortable.
nah its alright as you can keep your fingers for buttons etc is just a cheaper option and you can change the position of the scroll wheel to were you want
 
Chotton

Chotton

Computer Specialist
Mythical Veteran Legendary Veteran Fabled Veteran
Messages
4,697
Reaction score
745
Points
715
Sin$
0
VERY interesting method!

I like it!
 
U

ukrides

Enthusiast
Messages
200
Reaction score
18
Points
70
Sin$
0
Teh God said:
Wouldn't this suck for Auto weapons?
USE YOUR COMMON SENSE ! you wouldnt need it for auto weapons so itl be switched off via switch at back
 
X

xavi17

Enthusiast
Messages
118
Reaction score
24
Points
70
Sin$
0
does this let you shoot to your full potential?........... Like on mw2 will this actually shoot as fast as the controllers that are programed with chips?
 
E

Emphasis

Enthusiast
Messages
283
Reaction score
31
Points
85
Sin$
0
This is actually very creative. I like it a lot. The possibilities of modded controllers just broadened again.:thumbup:
 
X

xavi17

Enthusiast
Messages
118
Reaction score
24
Points
70
Sin$
0
Hey man i just tried this but instead of shooting, it only started to aim fast and move in circles. Can you please help me with this? as for why its happening?:?
 
S

ShadowZ

Enthusiast
Messages
1,390
Reaction score
203
Points
165
Sin$
7
xavi17 said:
i use the Default button/stick layout

Check to make sure that the solder isn't touching any other points, seems like it might be touching one of the right stick's contacts.
 
X

xavi17

Enthusiast
Messages
118
Reaction score
24
Points
70
Sin$
0
ok i made sure nothing was touching.... now it only starts looking around in circles..... and the trigger doesnt fire either... any suggestions?:?

what pins should i connect to the controller, all three, or first pin and middle pin, last pin and middle pin, or first and last pins?
 
U

ukrides

Enthusiast
Messages
200
Reaction score
18
Points
70
Sin$
0
xavi17 said:
ok i made sure nothing was touching.... now it only starts looking around in circles..... and the trigger doesnt fire either... any suggestions?:?

what pins should i connect to the controller, all three, or first pin and middle pin, last pin and middle pin, or first and last pins?

this is where you would connect :biggrin: if facing the right way up :biggrin:


  • connect to one end of scroller ( pin 1)
  • connect to switch then switch to scroller :biggrin: (pin 2)
  • not connected (pin 3)
If that does'nt work take a pic of your current connections and il put you in the right way :biggrin: il make a schematic at one point :biggrin:
 
Status
Not open for further replies.
Top Bottom
Login
Register