What's new

Solved Qusetions about jr programmer v2 rater and rgh2

  • Thread starter nickmoses
  • Start date
  • Views 776
nickmoses

nickmoses

Newbie
Messages
6
Reaction score
0
Okay here are some pics from a crappy iphone 4 and that is the best I got right now. These pics are of the xbox 360 that I hooked rater up to and the xbox 360 that is not letting me read the nand. I didn't want to make another post so I just put it here. If I should make another post than please let me know. Just want to make sure the connections look okay. I'm not great at soldering but haven't broke anything yet and have repaired a few. So thats good enough for me. 1) With the JAsper 16MB I would like to know if anyone can tell me why it will not read the nand. I have resoldered it many times but remind u I have resoldered numerous times and I have never ever had this much problems reading a nand. I even hooked the falcon up and soldered on the same nandx wires that I was using for the Jasper and it read fine. You will see that in the log. 2) The falcon I would like to use rater to check timing. PLease tell me if I have everything connected properly. Anyhoo...


Images of the Falcon


Images of Jasper 16MB


This first log is of the falcon


  • Console Type: Falcon
  • Programmer Used: JRP v2.0
  • NAND Size: 16
  • Dashboard version: 17349
  • CB Version: 5774
  • Screenshot of NAND details from J-Runner: http://imgur.com/WPII6So
  • J-Runner log: Version: 10
    Flash Config: 0x01198010
    01198010
    Xenon, Zephyr, Opus, Falcon
    CB Version: 5774
    Falcon/Opus
    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
    Reading Nand
    Done!
    in 3:30 min:confused:ec

    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
    Initializing nanddump1.bin..
    Falcon/Opus
    Jtag Selected
    Nand Initialization Finished
    Reading Nand
    Done!
    in 3:30 min:confused:ec

    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin
    Comparing...
    Nands are the same
    Reading Nand
    Done!
    in 3:30 min:confused:ec

    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin
    Comparing...
    Nands are the same
    Reading Nand
    Done!
    in 3:30 min:confused:ec

    Comparing...
    Nands are the same
    Glitch2 Selected
    CR4 Selected
    Falcon Manually Selected
    ECC created
    Version: 10
    Flash Config: 0x01198010
    Writing Nand
    image_00000000.ecc
    Done!
    in 0:18 min:confused:ec
  • Detailed Description of the Problem: Not booting to Xell
  • Was the console working before you started: Y
  • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
  • How long is the light on for each time: 1 sec




The log below is for the Jasper



  • Console Type: Jasper 16MB
  • Programmer Used: JRP v2.0
  • NAND Size: 16MB
  • Dashboard version: 17489
  • CB Version: 6754
  • Screenshot of NAND details from J-Runner: http://imgur.com/0nXaEjj
  • J-Runner log of when it worked:
    Version: 01
    Flash Config: 0x00023010
    00023010
    Trinity, Jasper 16MB
    CB Version: 6754
    Jasper 16MB
    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
    Cancelled
    Version: 01
    Flash Config: 0x00023010
    00023010
    Trinity, Jasper 16MB
    CB Version: 6754
    Jasper 16MB
    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
    Reading Nand
    Done!
    in 3:39 min:confused:ec

    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
    Initializing nanddump1.bin..
    Jasper 16MB
    Jtag Selected
    Nand Initialization Finished
    Reading Nand
    Done!
    in 3:38 min:confused:ec

    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump3.bin
    Comparing...
    Reading Nand
    Nands are the same
    Done!
    in 3:38 min:confused:ec

    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump4.bin
    Comparing...
    Reading Nand
    Nands are the same
    Done!
    in 3:39 min:confused:ec

    Comparing...
    Nands are the same
    Glitch2 Selected
    Jasper 16MB Manually Selected
    Version: 01
    Flash Config: 0x00023010
    Writing Nand
    JASPER_CR4.ecc
    Done!
    in 0:18 min:confused:ec
  • J-Runner log of when it didnt work: Tuesday, October 06, 2015 10:30:42 PM

    J-Runner v0.3 Beta (7) Started


    WARNING! - Your selected working directory already contains files!
    You can view these files by using 'Show Working Folder' Button


    Checking Files
    Finished Checking Files
    Downloaded *xeBuild/17349/_glitch.ini
    Downloaded *xeBuild/17349/_glitch2.ini
    Downloaded *xeBuild/17349/_glitch2m.ini
    Downloaded *xeBuild/17349/_jtag.ini
    Finished Checking Files
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 00
    Wrong Version.
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Could not find a part of the path.

    ================================================== =
    Tuesday, October 06, 2015 11:07:37 PM

    J-Runner v0.3 Beta (7) Started


    WARNING! - Your selected working directory already contains files!
    You can view these files by using 'Show Working Folder' Button

    Version: 01

    Flash Config: 0x00000000
    Can not Continue
    Checking Files
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Finished Checking Files
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x01198010
    01198010
    Xenon, Zephyr, Opus, Falcon
    CB Version: 5774
    Falcon/Opus
    Reading Nand to C:\Users\moses\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
    Cancelled
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
    Version: 01
    Flash Config: 0x00000000
    Can not Continue
  • Detailed Description of the Problem: Not reading nand
  • Was the console working before you started: Y
  • Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: N
  • How long is the light on for each time: N/A
 
nickmoses

nickmoses

Newbie
Messages
6
Reaction score
0
Everything is all good now.

KLzDy4E.png


Any suggestions on how to improve time or is this the best i'm gonna get?
 
Atlas

Atlas

Local Rivethead
VIP
Retired
Mythical Veteran Trifecta TotM
Messages
16,755
Reaction score
13,887
ny suggestions on how to improve time or is this the best i'm gonna get?
I'm no professional at soldering as my hands are pretty shaky, but from the small amount of experience I have, the shorter the wires, the better (to an extent).
 
GOTTA BLAST

GOTTA BLAST

wii u enthusiast
Messages
325
Reaction score
155
I'm no professional at soldering as my hands are pretty shaky, but from the small amount of experience I have, the shorter the wires, the better (to an extent).
Agree with this. Since I'm on mobile I can't see your pictures, but make sure all wires are connected to the point. When I repaired my current rgh that was one of the problems.
 
HuskerHeaven

HuskerHeaven

when I took his glass of champagne...
Retired
Messages
8,251
Reaction score
3,368
I'm no professional at soldering as my hands are pretty shaky, but from the small amount of experience I have, the shorter the wires, the better (to an extent).
While wire length is important, it's not necessarily the shorter the better, and it only makes a difference on cpurst And post.
Everything is all good now.

KLzDy4E.png


Any suggestions on how to improve time or is this the best i'm gonna get?
Try using the caps to fine tune it.
 
Top Bottom