What's new

Solved quick rgh question

  • Thread starter quest2
  • Start date
  • Views 188
Q

quest2

Newbie
Messages
16
Reaction score
0
Points
20
Sin$
0
I'm rghing a 16mb jasper following this guide https://www.se7ensins.com/forums/th...get-a-cr4-like-experience-phats-only.1349194/

I'm using an x360 ace and want to use the dynamic timing files, I've just got my nand dumps and want to write ECC do I tick CR4 or only when creating the Xebuild image after I get the cpu key?
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
I'm rghing a 16mb jasper following this guide https://www.se7ensins.com/forums/th...get-a-cr4-like-experience-phats-only.1349194/

I'm using an x360 ace and want to use the dynamic timing files, I've just got my nand dumps and want to write ECC do I tick CR4 or only when creating the Xebuild image after I get the cpu key?
It won't make a difference whether CR4 is ticked for the ECC.
Just create it without it ticked - or with it, again it doesn't matter.

Then get your CPU Key, and create the XeBuild image with it ticked.
 
Top Bottom
Login
Register