What's new

Solved Quick bricked xbox 360 console question

K

KittxD

Enthusiast
Messages
210
Reaction score
10
So this guy bought a rghed xbox off me. Lately the new update has came out, and he followed what his friend told him to do. He updated with the same nand as his friend lol. So the cpu key was wrong for his console. Anyways, he will send it back into me, I got all original nand info/cpu key/dvd key. So in his case now, when he powers on console the green light flashes, fans do not run, and a red light on the psu. My question is can I just write in the nand through the wires fine (nandx) without any problems? and will it still work. Thanks in advance.
 
K

KittxD

Enthusiast
Messages
210
Reaction score
10
bump need help with this.
 
H

Hypotoad

Enthusiast
Messages
496
Reaction score
107
I see what you are saying, you think that e'fuses have been blown with the upgrade, then I would write the same version "hacked" dash to the console using J-Runner, that should work fine.
 
N

NfX

ex-CoD Hoster
Messages
2,984
Reaction score
793
Well he just has a bad nand flash, in all honesty with a lost cpukey.
So just rewrite a backup of the nand and you should be okay.
But, i havent done this before so do update the backup to 17489 first :wink:
 
K

KittxD

Enthusiast
Messages
210
Reaction score
10
Well he just has a bad nand flash, in all honesty with a lost cpukey.
So just rewrite a backup of the nand and you should be okay.
But, i havent done this before so do update the backup to 17489 first :wink:
I see what you are saying, you think that e'fuses have been blown with the upgrade, then I would write the same version "hacked" dash to the console using J-Runner, that should work fine.

Aight thanks guys for the info.
 
Top Bottom