trippinz
Enthusiast
I have a rrod jtag that i have reflowed in the oven twice. But i stuck it in the fridge 1 minute after baking it for half an hour. This caused the oven trick not to be as effective thus causing another rrod followed by another one after i used the same trick. Both times the trick gave me a good 12 hours of life before a RROD.
The problem is that I live in the UK with a GAS heater with gas marks for the temperature of the board and cannot remember for the life of me which one i used.
So my questions are:
1)What gas mark should I use to reflow the solder joints via a GAS OVEN?
2)For how long should I keep it in there?
Thank you,
The problem is that I live in the UK with a GAS heater with gas marks for the temperature of the board and cannot remember for the life of me which one i used.
So my questions are:
1)What gas mark should I use to reflow the solder joints via a GAS OVEN?
2)For how long should I keep it in there?
Thank you,