HondaracerX360 said:1.Go into your Hex Editor.
2.Open your screenshot CON.
3.Search "JFIF" (without quotes) then go 6 bytes back from the letter "J" remember the offset.
4.Search "_eof" (without quotes) then go to the byte before the "_" remember the offset
5.Now go to Edit--> Select Block and insert the offset that you got from step 3 into the first box, then insert the offset you got from step 4 into the second box.
6. Right click and select copy, then go to File--> New and paste the data you just copied.
7.Save it as "what-ever-you-want.JPG" (without quotes) remember to put the .JPG so it can save it as an image.
8.Once you saved it, edit all you want!
9.To inject it back into your container just open your screenshot you just edited and go to Edit--> Select Block, in the first box just put a "0" (once again without quotes) and in the second box insert the offset of the very end of the file.
10. Finally right click select copy and go back to your Screenshot container, if you didn't close your Hex Editor it should still be highlighted, if it is just right click and paste. and thats it if you closed your hex editor you are gonna need to find the offsets again.
11.Save, rehash with Haxalot's rehasher and resign with whatever resigner you want. (i said to use haxalots because it can hash like 12MB)
12.Put back into your Xbox 360 HD, boot up halo and enjoy
I hope that i was able to help you!!! This is the way i have always done it.
oh and heres a tip for you. in the begining of my tutorial where you have to find the offset in step 3, it's always E148.
Dark R0gue said:
