What's new

Solved Please Help 3 rings

  • Thread starter Xex_Blaze_Official
  • Start date
  • Views 109
X

Xex_Blaze_Official

Enthusiast
Messages
37
Reaction score
2
Hey s7 users ok so i recently added thermal paste to my xenon jtag and when i cut it on it goes to 3 rings then to 2 OR it boots up them goes straight to 2 rings Cam Someone help me Did i do something Wrong?
 
A

Apollo

Houston, we have a problem.
Messages
2,252
Reaction score
1,258
Hey s7 users ok so i recently added thermal paste to my xenon jtag and when i cut it on it goes to 3 rings then to 2 OR it boots up them goes straight to 2 rings Cam Someone help me Did i do something Wrong?
Did you tighten the screws connecting the heat sync to the mobo? Chances are they're loose. Also, where did you apply the paste?
 
X

Xex_Blaze_Official

Enthusiast
Messages
37
Reaction score
2
Did you tighten the screws connecting the heat sync to the mobo? Chances are they're loose. Also, where did you apply the paste?
No i didnt tighten the screws that may be the problem and on the gpu i believe
 
A

Apollo

Houston, we have a problem.
Messages
2,252
Reaction score
1,258
No i didnt tighten the screws that may be the problem and on the gpu i believe
Check the CPU's paste aswell, also do you know how to get the RROD error code on your console?
 
F

frayed

Enthusiast
Messages
545
Reaction score
355
did you remove the old thermal paste before adding new?

Secondary Error Codes

if you are youtubing, please DO NOT wrap your console in a towel, bake it in the oven, murder it with a heat gun

c8dba17a88e0ae95efdf78d4c6b45a40.png
 
Top Bottom