What's new

Solved need to rewire falcon

  • Thread starter KaitenThaHax
  • Start date
  • Views 163
K

KaitenThaHax

Enthusiast
Messages
297
Reaction score
75
i have 30 awg kynar wire and dioeds to finish my jtag that i bought from a seller who didnt finish it
i was getting e79 error due to the wiring can anyone guide me through this

http://i.imgur.com/U63KkHF.jpg

http://i.imgur.com/EwOw9Or.jpg

this one looks strange idk if its an issue thats causing it http://i.imgur.com/DB7PrJq.jpg
http://i.imgur.com/ove4ZNN.jpg
http://i.imgur.com/U63KkHF.jpg
 
K

KaitenThaHax

Enthusiast
Messages
297
Reaction score
75
im a bit scared i have 30 awg kynar wire the dioeds i want someone to walk me through
 
O

oblivioncth

Mr. Cloth
Messages
7,015
Reaction score
2,146
i have 30 awg kynar wire and dioeds to finish my jtag that i bought from a seller who didnt finish it
i was getting e79 error due to the wiring can anyone guide me through this

http://i.imgur.com/U63KkHF.jpg

http://i.imgur.com/EwOw9Or.jpg

this one looks strange idk if its an issue thats causing it http://i.imgur.com/DB7PrJq.jpg
http://i.imgur.com/ove4ZNN.jpg
http://i.imgur.com/U63KkHF.jpg
I would remove everything that is there, clean up the points with flux off or rubbing alcohol and start over. That looks way messy and one of the connections is being made with just uninsulated metal.
 
K

KaitenThaHax

Enthusiast
Messages
297
Reaction score
75
I would remove everything that is there, clean up the points with flux off or rubbing alcohol and start over. That looks way messy and one of the connections is being made with just uninsulated metal.

im sending it in to get fixed
 
Top Bottom