Solved Need Pics off route

[Audi R8]

hi I was trying to find some pictures of the routing of the wires on a rgh2 flacon because I keep freezing and I know its not the game as I tried hdd and disk so does any one have the pics of the wire route?

 

[Noobert]

hi I was trying to find some pictures of the routing of the wires on a rgh2 flacon because I keep freezing and I know its not the game as I tried hdd and disk so does any one have the pics of the wire route?

If you open J-Runner, and go to Images, they have pictures in there.

 

[Audi R8]

If you open J-Runner, and go to Images, they have pictures in there.

I know but none of them say which way to route them it only shows the points where to solder

 

[Noobert]

I know but none of them say which way to route them it only shows the points where to solder

Oh, the route honestly really doesn't matter. As long as you have a solid connection, you should be fine.

Post pics of what you have currently.

 

[Audi R8]

Oh, the route honestly really doesn't matter. As long as you have a solid connection, you should be fine.

Post pics of what you have currently.

Ok I will do once I freeze again :/

 

[Big_Ddog]

The wire lengths and placement do matter for rgh 2.0 if your using a coolrunner Rev a-c/d.

For cr4xl it won't matter.

Also try changing your smc,

http://www.se7ensins.com/forums/thr...diting-fixes-falcon-freezing-on-rgh2.1166312/

That is probably your problem.

 

[Audi R8]

The wire lengths and placement do matter for rgh 2.0 if your using a coolrunner Rev a-c/d.

For cr4xl it won't matter.

Also try changing your smc,

http://www.se7ensins.com/forums/thr...diting-fixes-falcon-freezing-on-rgh2.1166312/

That is probably your problem.

Will try

 

[Noobert]

The wire lengths and placement do matter for rgh 2.0 if your using a coolrunner Rev a-c/d.

For cr4xl it won't matter.

Also try changing your smc,

http://www.se7ensins.com/forums/thr...diting-fixes-falcon-freezing-on-rgh2.1166312/

That is probably your problem.

The lengths do, the placement doesn't.

 

[Audi R8]

The wire lengths and placement do matter for rgh 2.0 if your using a coolrunner Rev a-c/d.

For cr4xl it won't matter.

Also try changing your smc,

http://www.se7ensins.com/forums/thr...diting-fixes-falcon-freezing-on-rgh2.1166312/

That is probably your problem.

I tried all of the values it just made it whole lot worst it freezes when it get to the bit where you click start game and it loads and about 3/4 of the way it freezes. Anything else I could try?