What's new

Solved Need help with flashing drive.

  • Thread starter ExtremelyStiff
  • Start date
  • Views 300
E

ExtremelyStiff

Enthusiast
Messages
766
Reaction score
119
My brother gave me this old xbox and i'm trying to flash it to lt 3.0
It's a samsung ms28 dvd drive
I can get it in vendor mode and regular what not.
But everytime a read it, the dvd key show's all zeros..I'm pretty sure thats not the key.
lol
I haven't flashed it yet cause i'm not a dumba$$ but do I have to load up something else to read the key? A probe or something?
Also i'm not sure what dash it's on. I just tore the thing apart and tried to flash but I can't get the key.
Help please? :smile:


here's the log..

Sending Sammy_Un_Lock to Drive on port 0xEC00
Stage 1, Complete!
Stage 2, Complete!
Stage 3, Complete!
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name: SST(SST39SF020)
Flash Size: 262144 bytes

Getting Status from port 0xEC00
Parallel flash found with Status 0x70

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Dumped in 10311mS

Samsung Dump file saved to SAM-OFW.bin
Loading firmware from buffer
Inquiry string found
Identify string found

Scanning sector 0x4000 for keys

0x401A BBBBBBFFFFFFFFFFFFFFFFFFFFFFFFFF
0x4044 BBBBBBFFFFFFFFFFFFFFFFFFFFFFFFFF
0x406E BBBBBBFFFFFFFFFFFFFFFFFFFFFFFFFF
0x4098 BBBBBBFFFFFFFFFFFFFFFFFFFFFFFFFF
0x40C2 BBBBBBFFFFFFFFFFFFFFFFFFFFFFFFFF
0x40EC 00000000000000000000000000000000
0x4116 00000000000000000000000000000000
0x4140 00000000000000000000000000000000
9 keys populated

Drive key @ 0x4140 00000000000000000000000000000000
Firmware Osig: [TSSTcorpDVD-ROM TS-H943Ams28]
Firmware is: Stock
Key database updated


Loading MTK_Flash source file
 
D

-DoC-

Enthusiast
Messages
119
Reaction score
18
Are you following the JF manual?
 
A

Aslan

Enthusiast
Messages
934
Reaction score
177
no it s on stock firmware and was never flashed
I know that people have used a hex editor to read the key when it is corrupted like that.In some cases the ox40EC is the key.I am not so well up on it.iMoses would be the person to consult.
 
E

ExtremelyStiff

Enthusiast
Messages
766
Reaction score
119
I know that people have used a hex editor to read the key when it is corrupted like that.In some cases the ox40EC is the key.I am not so well up on it.iMoses would be the person to consult.
how would I use hex editor? Should I open the firmware file?
And how is it corrupted? It still works on the xbox. I just can't read it. I get no errors. IDK.
 
A

Aslan

Enthusiast
Messages
934
Reaction score
177
how would I use hex editor? Should I open the firmware file?
And how is it corrupted? It still works on the xbox. I just can't read it. I get no errors. IDK.
I think its to do with jungle flasher.It wont work if you write the cfw to it.You could brick it.You read the .bin file in hex workshop.
 
Top Bottom