What's new

Solved Need help please with getting the "DVD Key" from 2x Xenon boards

  • Thread starter BluesMan67
  • Start date
  • Views 70
B

BluesMan67

Enthusiast
Messages
363
Reaction score
44
Hi guys,please can anyone offer some help in my quest in getting the "DVD Key" from 2x Xenon boards i have.
I have tried doing it through "Xenon RGH1.2" method (using the Ace v3 glitch chip) but both these Xenon boards completely refuse to boot into "Xell" to grab the "CPU Key"
So i have bought a Matrix v3 chip and a USB TTL dongle to try and grab the "DVD Key" through J-Runner's "Monitor COM"
I have googled and searched on Youtube for a tuturial on the TTL method but can not find anything that shows a proper tuturial from start to finish.
Please could someone do a simple but in detail tuturial on how i wire up the Matrix v3 chip and how many wires are soldered to the TTL dongle and where those wires are soldered to on the Matrix v3 chip.
Both these Xenon boards boot into "Stock" dashboard no problem at all but i want to pair a DVD drive to each board now and get these consoles finished off once and for all.
Thanks ever so much,guys
 
B

BluesMan67

Enthusiast
Messages
363
Reaction score
44
Admin.Please mark this thread as "Solved" Thanks ever so much :smile:
 
Top Bottom