What's new

Unsolved nanddump.bin has a mixed controller LBA

  • Thread starter 28belinea31
  • Start date
  • Views 81
2

28belinea31

Newbie
Messages
21
Reaction score
0
hi there,4

so my frind asked me to updated his rgh(?it boots instant. hope its not a jtag). im followed this tut:

https://www.se7ensins.com/forums/threads/how-to-update-your-rgh-jtag-to-17559.1385131/

after dumping nand and entering cpu key i get the following error(s):

***** WARNING: nanddump.bin has a mixed controller LBA at block 0x2 (raw offset 0x8400), block ignored
this is likely caused by previously using jaspersb on a jasper type console!
***** WARNING: nanddump.bin has a mixed controller LBA at block 0x3 (raw offset 0xc600), block ignored
this is likely caused by previously using jaspersb on a jasper type console!
***** WARNING: nanddump.bin has a mixed controller LBA at block 0x4 (raw offset 0x10800), block ignored
this is likely caused by previously using jaspersb on a jasper type console!

etc........

its a falcon mainboard:

https://de.ifixit.com/Teardown/Xbox+360+Power+Supply+Teardown/19729


do i need to put the KV in another falcon nand or whats goin on here? i dont want to f it up because i dont own a hardware flasher anymore....


THXXXXXXXX!
 
Top Bottom