What's new

Solved nand swap

B

bigdee

Newbie
Messages
1
Reaction score
0
hi all new to this forum , I was looking to swap nands chips on my xbox360 boards I don't mine if the board get fu-ked I get them from my work time to time. I had a board with old dashboard on it I know I got it working, and will I was trying to wire it up for the jtag a ball of solder fell on the board on the south bridge need I say more. will I have the nand chip I would like to put it on a other board same board (falcon) and could I do the jtad on it I don't have the cpu key and I don't have the cpu to put on it with the nand chip

looked every where to find out if I could
though I would come here pep say its a good forum

thanks for any help

ps the board i want to put it on is pasted jtag spot
 
Last edited:
R

rjb2968

Enthusiast
Messages
72
Reaction score
1
Would not work the cpu key wouldnt match the nand
 
N

Nate501777

Newbie
Messages
6
Reaction score
0
Would not work the cpu key wouldnt match the nand
It may work, if you use a donor Nand and flash the ecc, boot into Xell to retrieve the original key, then create a new Nand with the original cpu key it should work, I may attempt this as my Nand died, if it works I'll report back.
 
Top Bottom