What's new

Solved Nand dump questions

  • Thread starter xInViziBLe v
  • Start date
  • Views 1,645
xInViziBLe v

xInViziBLe v

Enthusiast
Messages
106
Reaction score
0
Points
60
how long should it take to dump your nand? its taken overs two hours.
And how many blocks are in the nand?
 
Brother Jordan

Brother Jordan

מספר אחד
VIP
Retired
Sinner Hardened Veteran MotM
Messages
16,615
Reaction score
11,285
Points
1,800
a nand dump via LPT should take 35-40 minutes
a nand dump via USB should take 5 minutes
the amount of bad blocks depends on the NAND itself and u need to make sure u get the same exact bad blocks on a second and/or 3rd dump

your cable is most likely too long if you are using an LPT cable and that is why it takes so long and you have so many bad blocks.
 
xInViziBLe v

xInViziBLe v

Enthusiast
Messages
106
Reaction score
0
Points
60
a nand dump via LPT should take 35-40 minutes
a nand dump via USB should take 5 minutes
the amount of bad blocks depends on the NAND itself and u need to make sure u get the same exact bad blocks on a second and/or 3rd dump

your cable is most likely too long if you are using an LPT cable and that is why it takes so long and you have so many bad blocks.
Thanks for that
Do you know how many total blocks are in the nand
 
Brother Jordan

Brother Jordan

מספר אחד
VIP
Retired
Sinner Hardened Veteran MotM
Messages
16,615
Reaction score
11,285
Points
1,800
It actually is entirely dependent on your NAND. My zephyr had no bad blocks.
 
Laugh

Laugh

Contributor
5th Anniversary Chatty Kathy Jokester
Messages
2,971
Reaction score
518
Points
325
mine probly takes too long cause my lpt cable is about 40cm long ? lol im going to cut it too about 15-20cm now

Why do you need a cable? Isn't there an option to dump it to the hdd?

mine probly takes too long cause my lpt cable is about 40cm long ? lol im going to cut it too about 15-20cm now

Why do you need a cable? Isn't there an option to dump it to the hdd?
 
Brother Jordan

Brother Jordan

מספר אחד
VIP
Retired
Sinner Hardened Veteran MotM
Messages
16,615
Reaction score
11,285
Points
1,800
truth. you may have bought ur jtag, but he is jtagging his own.
invizible. ignore what he is saying, he apparently thinks everyone buys theirs.

40cm doesnt sound like the cable is too long. maybe make is a little shorter, and make sure that ur resistors and diodes are all in the right spot and everything
 
xInViziBLe v

xInViziBLe v

Enthusiast
Messages
106
Reaction score
0
Points
60
truth. you may have bought ur jtag, but he is jtagging his own.
invizible. ignore what he is saying, he apparently thinks everyone buys theirs.

40cm doesnt sound like the cable is too long. maybe make is a little shorter, and make sure that ur resistors and diodes are all in the right spot and everything

ok thanks moses and the diodes and wires are 100% in the right place i didnt use the resistors or the optional diode because it didnt work with them
 
Laugh

Laugh

Contributor
5th Anniversary Chatty Kathy Jokester
Messages
2,971
Reaction score
518
Points
325
truth. you may have bought ur jtag, but he is jtagging his own.
invizible. ignore what he is saying, he apparently thinks everyone buys theirs.

40cm doesnt sound like the cable is too long. maybe make is a little shorter, and make sure that ur resistors and diodes are all in the right spot and everything


I thought he was talking about dumping the nand AFTER everything as in unbanning the xbox. My fault.
 
Brother Jordan

Brother Jordan

מספר אחד
VIP
Retired
Sinner Hardened Veteran MotM
Messages
16,615
Reaction score
11,285
Points
1,800
im pretty sure you need your 100 ohm resistors. that might be the reason you are getting so many bad blocks. i dont use LPT, i use a USB nand reader.
 

Similar threads

superspeed
Replies
0
Views
270
superspeed
superspeed
D
Replies
8
Views
231
2Quick4U
2Quick4U
deftones249
Replies
1
Views
256
sakobatoneko
S
M
Replies
6
Views
377
mixmastormatt
M
D
Replies
7
Views
634
dreds25
D
Top Bottom
Login
Register