What's new

Solved missing part on motherboard

T

Team13

Enthusiast
Messages
40
Reaction score
1
hey all im new to forums and jtaging but did 2 of them.
i got a xbox from my friend for 20 and it has a part misssing.
the pic is where image chip is (i think)

i was wondering if some one has a crappy xbox with missing part that i could get or where can i get one
i got the nand.bin and kv from it so if i can get on no biggie
iwhen i turn on it has 3 rrod and no display
i dumped nand with no errors
he did a clamp fix and it did work then he try slodering and burnt the board
bottom of j1d2

thetop of jid2
 
B

Blaze

In your mind
VIP
Retired
Messages
13,778
Reaction score
5,681
yea i dont think you can jtag/work, i could be wrong
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,309
yea i dont think you can jtag/work, i could be wrong

those caps wont affect it. um, u need to look for bridged solder joints around it tho

also, check for the secondary error code
 
T

Team13

Enthusiast
Messages
40
Reaction score
1
do u think the cap is to show display on tv cuz it not showing anything on tv.
i got a cod of 0022 GPU Error / GPU Overheating
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,309
do u think the cap is to show display on tv cuz it not showing anything on tv.
i got a cod of 0022 GPU Error / GPU Overheating

cap stands for capacitor... lmao.
x-e says:
1)If you soldered anything to the mainboard before it occured, whatever you are powering from this point is drawing too much power so get rid of it.Also get rid of everything that you can see that might bridge anything near the GPU.
2) X-Clamp replacement
3) Reflow GPU and HANA chip
4) If it\'s not the GPU/(H)ANA, it might in rare cases be the CPU and can be fixed by reflowing the CPU.
5) if you flash with xell on JTAG-fixed xbox360 this will appear, flash back to original.
6) also can be caused by a broken trace (see link below).
 
I

iProScopes

Contributor
Messages
3,184
Reaction score
484
Do the X-Clamp fix.
My friend had the same problem and I fixed it.
 
T

Team13

Enthusiast
Messages
40
Reaction score
1
i found more problems

thanks for help
im not going fix anymore
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,309
bro. that console is EFFED up.... its dead for sure lol.. all the solder points are bridged on that chip and the traces are cut, which is why u get 0022
 
T

Team13

Enthusiast
Messages
40
Reaction score
1
bro. that console is EFFED up.... its dead for sure lol.. all the solder points are bridged on that chip and the traces are cut, which is why u get 0022

thanks is there any way to get kv from it with out useing xell
 
Top Bottom