LlNT LlCKER
Newbie
I need some help installing LEDs into a wireless Matrix controller. I have a clear shell installed, and I'm looking into placing the LEDs below the rumble packs.
The LEDs I'll be using are: http://www.superbrig...anging-led/778/
I need to know what resistors to buy and where to solder the wires on the board to get the LEDs be on only when the controller is on. I have two (one to place under each rumble pack). Also, if you could direct me to a cheap soldering iron with solder, that would be great. I'm borrowing one for now. Finally, this is NOT a ring of light mod. Please include pictures of where to solder the wires to on the board or the Wireless Matrix controller, and wires to the LEDs. I already know how to take the controller apart. Thanks!
The LEDs I'll be using are: http://www.superbrig...anging-led/778/
I need to know what resistors to buy and where to solder the wires on the board to get the LEDs be on only when the controller is on. I have two (one to place under each rumble pack). Also, if you could direct me to a cheap soldering iron with solder, that would be great. I'm borrowing one for now. Finally, this is NOT a ring of light mod. Please include pictures of where to solder the wires to on the board or the Wireless Matrix controller, and wires to the LEDs. I already know how to take the controller apart. Thanks!