What's new

Solved KVs ????

tavy1101

Newbie
Messages
5
Reaction score
0
i need help on how to use a kv plz help :wink:
 

Brinko

Retired & VIP HypeMan.
VIP
Retired
Messages
9,561
Reaction score
4,847
Well, Just to be safe, Get a Type 2.

1.) open 360 Flash Tool
2.) open your free boot image
3.) click import
4.) click the kv box then the open button
5.) open your keyvault
6.) click Ok then save as updflash.bin
7.) close 360 flash tool ..... reopen it
8.) open updflash.bin
9.) at the bottom go to patch
10.) click the box Patch key vault
11.) paste in the box your Dvd key and
click the drop down box and click your osig
12.) click ok and save as updflash.bin and click yes to replace
13.) put usdflash.bin on usb stick (pen drive)
14.) put in your jtag and turn it on then go to xexmenu

ON JTAG

DONT HAVE YOUR ETHERNET OR ANY INTERNER SOURCE IN WHEN YOU START JTAG WHEN YOUR GOING TO PUT A KV ON


once on xexmenu click Rb and your usbstick will come up with your files on it your usb stick
1.)click flash 360
2.) click a
3.) click b
4.) click start twice
5.) click a
6.) a bar at the bottom should go up in percent
7.) once its done click a
8.) click the back button NOT b the Back button
9.) click the back button again
10.) it should go 5 4 3 2 1 then shut off and pull out powercable for 5 seconds
11.) start jtag WITH ethernet or interent source in
12.) click your settings and s*** like english then united kingdom .....
13.) then it should come up with like your ethernet and do you want to configure now
14.)you click yes it should come up with your internet then click ok
15.) then it should say need more info and then it will automaticly test xbox connection if goes through with no problems your all set
16.) if it doesnt work and say's this console is banned then you have done something wrong or you got scammed for a banned kv
ANY PROBLEMS
contact me on aim: SamBrinkley54
 

tavy1101

Newbie
Messages
5
Reaction score
0
Well, Just to be safe, Get a Type 2.

1.) open 360 Flash Tool
2.) open your free boot image
3.) click import
4.) click the kv box then the open button
5.) open your keyvault
6.) click Ok then save as updflash.bin
7.) close 360 flash tool ..... reopen it
8.) open updflash.bin
9.) at the bottom go to patch
10.) click the box Patch key vault
11.) paste in the box your Dvd key and
click the drop down box and click your osig
12.) click ok and save as updflash.bin and click yes to replace
13.) put usdflash.bin on usb stick (pen drive)
14.) put in your jtag and turn it on then go to xexmenu

ON JTAG

DONT HAVE YOUR ETHERNET OR ANY INTERNER SOURCE IN WHEN YOU START JTAG WHEN YOUR GOING TO PUT A KV ON


once on xexmenu click Rb and your usbstick will come up with your files on it your usb stick
1.)click flash 360
2.) click a
3.) click b
4.) click start twice
5.) click a
6.) a bar at the bottom should go up in percent
7.) once its done click a
8.) click the back button NOT b the Back button
9.) click the back button again
10.) it should go 5 4 3 2 1 then shut off and pull out powercable for 5 seconds
11.) start jtag WITH ethernet or interent source in
12.) click your settings and s*** like english then united kingdom .....
13.) then it should come up with like your ethernet and do you want to configure now
14.)you click yes it should come up with your internet then click ok
15.) then it should say need more info and then it will automaticly test xbox connection if goes through with no problems your all set
16.) if it doesnt work and say's this console is banned then you have done something wrong or you got scammed for a banned kv
ANY PROBLEMS
contact me on aim: SamBrinkley54
thanks for that m8 :biggrin: :biggrin: :biggrin: :biggrin:
 
Top Bottom