What's new

Solved Jtag support [please help!]

F

frvwfr3

Newbie
Messages
7
Reaction score
0
Ok, so I was planning on hosting tonight, so I go to reflash my nand (I had XBE image on it, needed original) so I went and got the nand, put it onto flash drive, went into flash tools and started the flash. When it finished, the xbox rebooted etc etc..

Once it rebooted, I saw first that the dashboard had reversed to the old one, and that I could not longer get to Xexmenu, I went to game demos section, and it was corrupted.

So I went and re-put Xexmenu onto my usb, but the old dashboard had no way of reading USB's??

So i am now stuck.. I need to get my jtag back up and running...

Can somebody please tell me how I can get to where I can re-flash it again.. I have no sort of cables or anything.. All I have is USB's.....
 
T

tripp419

Enthusiast
Messages
480
Reaction score
123
you will haave to reflash xbr, u flashed your original nand and now ur hooped bro sorry to say...
you can reflash with a lpt cable or a usb nand extractor but either way your not hosting tonight
 
F

frvwfr3

Newbie
Messages
7
Reaction score
0
I had already given up on hosting tonight...

How do i do what you said... If you would add me on aim/msn and help me a bit.. That would be great...
 
T

tripp419

Enthusiast
Messages
480
Reaction score
123
I had already given up on hosting tonight...

How do i do what you said... If you would add me on aim/msn and help me a bit.. That would be great...
you will need a pc with a paralell port aka printer port then a printer cable with a male db25 on the end, then there are tuts how to solder it into your xbox and what pins need to have wires on them, you will also need 100ohm resistors for the cable. or you can try and buy a usb one off somewhere ebay, ioffer. but i dont kno much about usb flashing im still using my home made lpt cable
 
F

frvwfr3

Newbie
Messages
7
Reaction score
0
Wtf.. So I basically have to re-jtag the xbox...?

There has to be a easier way than that..

Like seriously...?
 
T

tripp419

Enthusiast
Messages
480
Reaction score
123
believe me i wish there was bud sorry to say...but yah you basically have to build the jtag from scratch!
 
F

frvwfr3

Newbie
Messages
7
Reaction score
0
That is f***ed up... One wrong file transfer and the whole damn thing explodes???


I might send it back to the seller to see if he can fix it for me 0.o

xD
 
T

tripp419

Enthusiast
Messages
480
Reaction score
123
prolly your best bet bud :smile:
 
I

iProScopes

Contributor
Messages
3,184
Reaction score
484
Take the original NAND image. Then Flash Freeboot 0.032 to it. Then re-flash to your Xbox.
 
Top Bottom