What's new

Solved Jtag rrod

E

i use ExTenZe x

Getting There
Messages
1,642
Reaction score
123
My Jtag kept giving me 2 red lights when ever i played a game. I took it apart to apply some more thermal paste. I put it back together and now when i turned it on it had 3 red lights. Do i just need to over heat it untill i get 2 red lights then will it work? or what?
 
O

OnyX

Ideas are Bulletproof
Retired
Messages
6,111
Reaction score
1,743
Find out what the secondary error code is by doing the following:

  • Turn the xbox 360 on, and wait till the 3 red lights are flashing.
  • Press and hold the sync up button (the small white one), while holding that button press the eject button.
  • The LEDs will now blink the first number in the code (as described below).
  • Release the eject button and press it again.
  • The LEDs will now blink the second number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the third number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the forth number of the code.
  • Release the eject button and press it again.
  • The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.
 
E

i use ExTenZe x

Getting There
Messages
1,642
Reaction score
123
Find out what the secondary error code is by doing the following:
well i cant really do that. The disk drive isnt connected. Could this have been when i took off the heatsinks to apply more paste?
 
E

i use ExTenZe x

Getting There
Messages
1,642
Reaction score
123
i over heated the xbox then i turned it back on green lights. Turned it back on then i got 3 red lights. Turned it back on again then got green lights? im going to let it cool down and see how things go :/
 
Top Bottom