What's new

Solved Jtag RROD - xenon

  • Thread starter Pooleyy xD
  • Start date
  • Views 1,765
P

Pooleyy xD

Enthusiast
Messages
115
Reaction score
6
Points
70
Sin$
0
I bought a jtag that has been bad flashed. I reflashed it . worked perfectly. But i got 3 rrod 5 minutes after that. I took out the DVD DRIVE and pointed a fan onto the motherboard. It worked occaisonaly but then got rrod. This happened serveral times but now it just doesnt work. Straight away 3 RROD . Against the top of the silver casing it has the burn marks of the heatsink. Do you think repasting under the CPU and GPU would fix this ?
 
OnyX

OnyX

Ideas are Bulletproof
Retired
MotM Frame In Gold
Messages
6,105
Reaction score
1,745
Points
655
Sin$
0
If it doesnt have already, try the xclamp mod. Also putting new paste might fix the RRoD as well.
 
P

Pooleyy xD

Enthusiast
Messages
115
Reaction score
6
Points
70
Sin$
0
its already been xclamped , i have orderd a rrod kit . will get it tomoro i think and try it. but would me getting the secondary error code not tell me whats actually wrong with it ?
 
OnyX

OnyX

Ideas are Bulletproof
Retired
MotM Frame In Gold
Messages
6,105
Reaction score
1,745
Points
655
Sin$
0
--==SECONDARY ERROR CODES==-
The specific type of hardware failure can be determined by a "hidden" error code
  • Turn the xbox 360 on, and wait till the 3 red lights are flashing.
  • Press and hold the sync up button (the small white one), while holding that button press the eject button.
  • The LEDs will now blink the first number in the code (as described below).
  • Release the eject button and press it again.
  • The LEDs will now blink the second number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the third number of the code.
  • Release the eject button and press it again.
  • The LEDs will now blink the forth number of the code.
  • Release the eject button and press it again.
  • The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:
  • All four lights flashing - 0
  • One light flashing - 1
  • Two Lights flashing - 2
  • Three lights flashing - 3
0001 See Error E01
0002 See Error E02
0003 See Error E03
0010 See Error E04
0011 See Error E05
0012 See Error E06
0013 See Error E07
0020 See Error E08
0021 See Error E09
0022 See Error E10
0023 (not yet known)
0030 See Error E12
0031 See Error E13
0032 (not yet known)
0033 (not yet known)
0100 See Error E16
0101 (not yet known)
0102 See Error E18
0103 See Error E19
0110 See Error E20
...
0200 (not yet known)
0201 (not yet known)
0202 (not yet known)
0203 See Error E35
...
1000 See Error E64
1001 See Error E65
1002 See Error E66
1003 See Error E67
1010 See Error E68
1011 See Error E69
1012 See Error E70
1013 See Error E71
1020 See Error E72
1021 See Error E73
1022 See Error E74
1023 See Error E75
1030 See Error E76
1031 See Error E77
1032 See Error E78
1033 See Error E79
1100 See Error E80
...
1444 and up There is no "4" in the error codes. Four lights is a "0" go back and check your code again.


From http://forums.xbox-scene.com/lofiversion/index.php/t484726.html
 
OnyX

OnyX

Ideas are Bulletproof
Retired
MotM Frame In Gold
Messages
6,105
Reaction score
1,745
Points
655
Sin$
0
E18: Error in the "Digital Backbone" (CPU/GPU/RAM), this is usually caused by a cold solder joint between the GPU and the mainboard.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced.

Yes, try to put the paste again, and if that doesn't work try reballing.
 
stebbo2010

stebbo2010

Enthusiast
Messages
78
Reaction score
2
Points
55
Sin$
0
your best bet is a reflow done by someone with the full setup not a hot air gun iv know some to be going on a year after the reflow

not to bad if you can get it done cheap
 
Top Bottom
Login
Register