What's new

Solved Jtag Help!

  • Thread starter AceRecordings
  • Start date
  • Views 341
A

AceRecordings

Enthusiast
Messages
38
Reaction score
2
Points
55
I just tried to flash my JTAG with the new dashboard. When I was done it Showed an error Message. E79 IT HAS ONE RED LIGHT IN THE BOTTOM RIGHT. I was hoping that someone could help me find a way to fix it and I could repay you with free 10th lobbies. Or you could just be nice and help me. :biggrin:


LOOKS LIKE THIS
xbox360-E-error-no-exact-pic-1-red-light-300x187.jpg


(PLEASE POST A LINK IF YOU FIND ONE)
 
Gerth

Gerth

Content Team
Content Team
Grizzled Veteran Grammar Nazi Experienced Veteran
Messages
1,600
Reaction score
340
Points
285
When I dealt with an E74 Jtag if you tilt it up on the side it works. But its not 100%. It jus makes the one red light go away. If you don't have the tools to fix it, you are probably gonna have to send it to someone to fix it. Icy-Tank is the perfect guy to fix that error. Cheap, fast and it will be returned amazing.
 
Y

Yakkyyful

Enthusiast
Messages
146
Reaction score
15
Points
70
Its definitely due to a bad image on your NAND.

If you cant boot Xell, you will have to sodler directly onto your NAND points and reflash your original NAND image.
You can send it to someone to do it. I charge $15 to recover your NAND, my AIM is Yakkyyful if you are interested.

If you can boot Xell,
http://www.se7ensins.com/forums/topic/214407-step-by-step-how-to-reflash-your-jtag-console-using-xellous-fix-controller-sync-problems/
 
oblivioncth

oblivioncth

Mr. Cloth
Mr. Nice Guy MotM TotM
Messages
7,015
Reaction score
2,143
Points
800
I just tried to flash my JTAG with the new dashboard. When I was done it Showed an error Message. E79 IT HAS ONE RED LIGHT IN THE BOTTOM RIGHT. I was hoping that someone could help me find a way to fix it and I could repay you with free 10th lobbies. Or you could just be nice and help me. :biggrin:


LOOKS LIKE THIS
xbox360-E-error-no-exact-pic-1-red-light-300x187.jpg


(PLEASE POST A LINK IF YOU FIND ONE)

It is also possible that you need to do the aud_clamp method. I believe that some dash builds work a bit differently on the JTAG wiring so while the normal JTAG setup might work on one build, it might not work on the other. E79 is either a bad flash, or the JTAG wires drawing too much power which requires the aud_clamp to fix.
 
Y

Yakkyyful

Enthusiast
Messages
146
Reaction score
15
Points
70
It is also possible that you need to do the aud_clamp method. I believe that some dash builds work a bit differently on the JTAG wiring so while the normal JTAG setup might work on one build, it might not work on the other. E79 is either a bad flash, or the JTAG wires drawing too much power which requires the aud_clamp to fix.


Since he just flashed his NAND though, its probably flash related. besides i think he said his was a xenon on AIM, which dont get aud_clamped
 
oblivioncth

oblivioncth

Mr. Cloth
Mr. Nice Guy MotM TotM
Messages
7,015
Reaction score
2,143
Points
800
Since he just flashed his NAND though, its probably flash related. besides i think he said his was a xenon on AIM, which dont get aud_clamped

Ya I know it's probably NAND related because the chances of needed the aud_clamp later but not earlier are slim but possible. But If he has a xenon then like you said there is not aud_clamp required ever.
 

Similar threads

S
Replies
2
Views
310
devilhunter1990
devilhunter1990
B
Replies
5
Views
348
irFrag
irFrag
Trevo
Replies
3
Views
631
Professional
Professional
Joseph2002
Replies
15
Views
258
Joseph2002
Joseph2002
R
Replies
1
Views
201
Lambsky
L
Top Bottom
Login
Register