What's new

Solved Jtag help

Ewok

Ewok

Enthusiast
Messages
518
Reaction score
33
Points
95
Sin$
0
I am building my Jtag using This guide, and I am to the step where I dump my Nand. Well when I type "nandpro.exe lpt: -r16 nand1.bin" It says this...

"Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller!
Can not continue"

I've done everything step for step, any ideas?
 
H

Hyp3rArska

Enthusiast
Messages
81
Reaction score
3
Points
55
Sin$
7
I am building my Jtag using This guide, and I am to the step where I dump my Nand. Well when I type "nandpro.exe lpt: -r16 nand1.bin" It says this...

"Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller!
Can not continue"

I've done everything step for step, any ideas?
I had this same problem... I used this tutorial and problem was solved.
 
OnyX

OnyX

Ideas are Bulletproof
Retired
MotM Frame In Gold
Messages
6,105
Reaction score
1,745
Points
655
Sin$
0
Also, make sure your soldering points are done correctly, also check for continuity between the the head of the LPT with the base points on the motherboard.
 
Rawlings 7s

Rawlings 7s

Enthusiast
Messages
1,465
Reaction score
148
Points
165
Sin$
7
I would suggest using jtag tool. You don't have to worry about giving the commands.

Also make sure your 360 is plugged in.
 
Ewok

Ewok

Enthusiast
Messages
518
Reaction score
33
Points
95
Sin$
0
I would suggest using jtag tool. You don't have to worry about giving the commands.

Also make sure your 360 is plugged in.

I have no clue what Jtag tool is, I'll Search it. But my 360 is plugged in , that stupid error just keeps coming up.

I downloaded Jtag tool, but how do I use it for dumping nand?
 
W

weirdo999

Newbie
Messages
44
Reaction score
0
Points
45
Sin$
7
i had a problem like this, then i made the wires that go into the lpt port really short, i didnt even use an lpt cable i just stuck the wires in the place they needed to you need to be careful but this solved my problems.
 
Top Bottom
Login
Register