What's new

Solved Jtag help

E

Ewok

Enthusiast
Messages
518
Reaction score
33
I am building my Jtag using This guide, and I am to the step where I dump my Nand. Well when I type "nandpro.exe lpt: -r16 nand1.bin" It says this...

"Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller!
Can not continue"

I've done everything step for step, any ideas?
 
H

Hyp3rArska

Enthusiast
Messages
81
Reaction score
3
I am building my Jtag using This guide, and I am to the step where I dump my Nand. Well when I type "nandpro.exe lpt: -r16 nand1.bin" It says this...

"Testing LPT device address:0378
Testing LPT device address:0278
Testing LPT device address:03BC
Could not detect a flash controller!
Can not continue"

I've done everything step for step, any ideas?
I had this same problem... I used this tutorial and problem was solved.
 
O

OnyX

Ideas are Bulletproof
Retired
Messages
6,111
Reaction score
1,743
Also, make sure your soldering points are done correctly, also check for continuity between the the head of the LPT with the base points on the motherboard.
 
R

Rawlings 7s

Enthusiast
Messages
1,465
Reaction score
148
I would suggest using jtag tool. You don't have to worry about giving the commands.

Also make sure your 360 is plugged in.
 
E

Ewok

Enthusiast
Messages
518
Reaction score
33
I would suggest using jtag tool. You don't have to worry about giving the commands.

Also make sure your 360 is plugged in.

I have no clue what Jtag tool is, I'll Search it. But my 360 is plugged in , that stupid error just keeps coming up.

I downloaded Jtag tool, but how do I use it for dumping nand?
 
W

weirdo999

Newbie
Messages
44
Reaction score
0
i had a problem like this, then i made the wires that go into the lpt port really short, i didnt even use an lpt cable i just stuck the wires in the place they needed to you need to be careful but this solved my problems.
 
N

NewbieShwa

Enthusiast
Messages
161
Reaction score
4
Its your LPT connection that you need to make sure is OK.. and that u have LPT drivers on your pc
 
Top Bottom