H
Hyp3rArska
Enthusiast
I need help by 1337 jtagger, who knows more than I do. Who solves my problem and gets my jtag working will get $5-10 by paypal (depending what is the problem, if its easy to solve, you will get only $5) and +REP. My AIM: aaaro.hakkinen@gmail . com Here is the problem... (jasper 256mb, freeboot 32) I tried to flash nand using flash360 and I accidently turned off it. Then I tried to turn it on, but I got christmas lights. It booted to Xell, but updflash.bin didn't worked, because it said it's too big (264mb). Next time I tried to turn it on, nothing happened. Now I've soldered lpt to it. When I tried to do anything with nandpro, it said "could not detect flash controller". So I found that I have to put it to recovery mode by shorting few nand pins. Before shorting psu's light was yellow/orange till i connected lpt to computer, then it turned red. After shorting pins, it was yellow/orange even if I connected lpt. Then I tried to flash xbr, which I made from my rawconfig.bin and rawkv.bin, because i didnt have original nand. First I deleted nand and then wrote till 0FFF, when psu's light turned red and nothing happened. After shorting pins and trying few more times, i understood that light goes red 5 seconds after connecting lpt or it goes till 0FFF and then stops and goes red. Sorry for not perfect english.