![Jbeezy_Lobbies](/data/avatars/m/668/668166.jpg?1590942045)
Jbeezy_Lobbies
Newbie
Okay so i have a falcon RGH and it takes so long to boot up. Is there any way to improve the bootup time?
no joke the highest was 10min after not using it for a whileI heard disconnecting the DVD drive speeds it up.. (Not sure if true or not). What are your boot times man?![]()
A New Glitch chip or shorter cpu_rst wire.no joke the highest was 10min after not using it for a while
Wow..Jesus ahahah. Give the DVD method ago, no harm in tryingno joke the highest was 10min after not using it for a while
Okay ill try bothA New Glitch chip or shorter cpu_rst wire.
Rgh1 or 2? My rgh1 falcon without DVD drive boots quicker than my retailOkay ill try both
Mine is RGH2Rgh1 or 2? My rgh1 falcon without DVD drive boots quicker than my retail
That will have some effect on the boot times, I haven't heard anything good about rgh2 boot times on falconsMine is RGH2
that is actually true because the xbox takes its time to scan the disk.I heard disconnecting the DVD drive speeds it up.. (Not sure if true or not). What are your boot times man?![]()
Alright so see if that helps?that is actually true because the xbox takes its time to scan the disk.
It didnt helpthat is actually true because the xbox takes its time to scan the disk.
well, reflash the nand and see what happens.It didnt help
RGH falcons are the worst of them all there really is no way of fixing it this point with out fixing wiring and chipsOkay so i have a falcon RGH and it takes so long to boot up. Is there any way to improve the bootup time?
Glitch 2What glitch chip are you using?
thats not the question Coolrunner Rev C A B D Or Matrix Glitcher Ect Is the Chip white and Have a red Lite on itGlitch 2
its a Cool Runner then and u have to have soldering skills to make the wires smaller and to change the flash on the nand u need a Jr Programmer or a Nand x and there not cheap and falcons are always a pain when booting is a a RGH 1 or RGH 2