What's new

Solved Jr programmer v2 help

E

Easton james

Newbie
Messages
22
Reaction score
1
I am doing the rgh hack to my slim trinity. I soldered in the wires to the nand correctly and I have a jr programmer v2. Whenever I go into J-runner it won't detect my Jr programmer. it says:

Bootloader Attached
Bootloader Version: 1.0.5

on all of the rgh tutorials i have seen it automatically detects their nand reader. Do I need to update my jr programmer or what?
 
C

Cobalt Blaze

I'm no hero. Never was, never will be.
Messages
407
Reaction score
149
I am doing the rgh hack to my slim trinity. I soldered in the wires to the nand correctly and I have a jr programmer v2. Whenever I go into J-runner it won't detect my Jr programmer. it says:

Bootloader Attached
Bootloader Version: 1.0.5

on all of the rgh tutorials i have seen it automatically detects their nand reader. Do I need to update my jr programmer or what?
Sounds like you don't have the drivers installed.
 
H

HuskerHeaven

when I took his glass of champagne...
Staff
Messages
8,251
Reaction score
3,380
I am doing the rgh hack to my slim trinity. I soldered in the wires to the nand correctly and I have a jr programmer v2. Whenever I go into J-runner it won't detect my Jr programmer. it says:

Bootloader Attached
Bootloader Version: 1.0.5

on all of the rgh tutorials i have seen it automatically detects their nand reader. Do I need to update my jr programmer or what?
You need to make sure the boot loader switch is in norm and then program flash the .hex file to it. The file is in the Jrunner folder.
 
E

Easton james

Newbie
Messages
22
Reaction score
1
I got it to work, thanks
 
X

XeGooch

RGH/Jtag Seller!
Messages
481
Reaction score
103
Good luck with your install :smile:
 
Top Bottom