Solved JASPER XBOX HELP!!!!

[Dkkkk]

I've got a fat xbox 2009 jasper which got rrod (3 rings). I have attempted to fix it but first time the power buttons never work and when turned on from controller it still flashes 3 rings. I did the same process all over again (reflow using a heat gun and changed the thermal paste) and the same problem. Thinking of doing it one more time but first I want ur suggestions. I'm thinking of doing the reflow in the oven this time. Any suggestions pls comment. What should I do?

 

[Green_Man]

Tbh, I would get it professianly done if that was mine. But, it's your choice.

 

[Atlas]

Thinking of doing it one more time but first I want ur suggestions. I'm thinking of doing the reflow in the oven this time

No, don't put it in the oven. Have someone more in line with repairing expertise to fix your console.
Check this section to find plenty of 360 Repair Services:
http://www.se7ensins.com/forums/forums/services.155/

 

[2liftheavy]

I've got a fat xbox 2009 jasper which got rrod (3 rings). I have attempted to fix it but first time the power buttons never work and when turned on from controller it still flashes 3 rings. I did the same process all over again (reflow using a heat gun and changed the thermal paste) and the same problem. Thinking of doing it one more time but first I want ur suggestions. I'm thinking of doing the reflow in the oven this time. Any suggestions pls comment. What should I do?

I'm afraid given the fact, you used a heatgun, without thermocouples, and timing, you have caused more damage than you think. Damn youtube videos