What's new

Solved Jasper Boot Help

  • Thread starter CONTREKEE
  • Start date
  • Views 140
C

CONTREKEE

Enthusiast
Messages
203
Reaction score
23
Hello, I am having trouble getting this console to boot into xell.
I'm not sure what's wrong.

Here are my solder points.


 
Last edited:
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Hello, I am having trouble getting this console to boot into xell.
I'm not sure what's wrong.

Here are my solder points.


What Timing File Is On It?
Also Why Do You Have The Stby_Clk Soldered I Mean You Don't Need It.
 
C

CONTREKEE

Enthusiast
Messages
203
Reaction score
23
Why Aren't You Doing RGH 1.2 And Using The Dynamic File?

Would Seriously Suggest That.
Tried the japser_dyn2 timing file with no luck.

I'm going to order a coolrunner rev c.
I was able to reflash the original nand dump and it still boots retail.
 
Last edited:
T

TheWeekendModder

Enthusiast
Messages
284
Reaction score
93
While I've heard good things about the dynamic Ace timing file on RGH 1.2 for phats, I personally haven't been very satisfied with it's consistency. RGH 1.2 using a Rev C or a Matrix V1 chip boots reliably and quickly and is what I recommend for phats (Jaspers and Falcons)
 
C

CONTREKEE

Enthusiast
Messages
203
Reaction score
23
While I've heard good things about the dynamic Ace timing file on RGH 1.2 for phats, I personally haven't been very satisfied with it's consistency. RGH 1.2 using a Rev C or a Matrix V1 chip boots reliably and quickly and is what I recommend for phats (Jaspers and Falcons)
Thank you.
Just ordered a coolrunner rev c
 
Top Bottom