What's new

Solved Jasper BB 512 won't glitch xell

  • Thread starter Nemesis43
  • Start date
  • Views 617
N

Nemesis43

Newbie
Messages
13
Reaction score
0
Anyone solves this issue for me will get a month of whatever stealth server or mod menu you choose. Can't get a Jasper BB512 to glitch xell. Had to make a small repair on the FT2R2 POINT so I used the topside r4b24. The repair consisted of using a small peice of wire,scratching away trace going to FT2R2 and soldering to reconnect the trace back to the point FT2R2.Consile wouldn't turn on before repair now it works perfect with original nand dump reflashed. That repair is the only thing out of the norm that I did on this console versus other consoles. I did the RGH 1.2 method. Only respond if your experienced with RGH /JTAG building please
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,624
Anyone solves this issue for me will get a month of whatever stealth server or mod menu you choose. Can't get a Jasper BB512 to glitch xell. Had to make a small repair on the FT2R2 POINT so I used the topside r4b24. The repair consisted of using a small peice of wire,scratching away trace going to FT2R2 and soldering to reconnect the trace back to the point FT2R2.Consile wouldn't turn on before repair now it works perfect with original nand dump reflashed. That repair is the only thing out of the norm that I did on this console versus other consoles. I did the RGH 1.2 method. Only respond if your experienced with RGH /JTAG building please
Post pictures of your install.
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
When I get home I will. This may be a dumb question but are there any Jasper or Falcon console that can't be modded
Out Of 3000+ Consoles I’ve Done, Never Had A Issue With Them.
 
A

afterjo

Enthusiast
Messages
766
Reaction score
113
Tried different timing files?
Install photos?
What chip you are using?
Does the chip even blink?
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
Tried different timing files?
Install photos?
What chip you are using?
Does the chip even blink?
Chip doest blink and I've tried a tone of timing files.
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
RGH  
 
I know yall know what your looking at but I'll remind u that the green and blue next to the red is my wires for reading/ writing g to the nand
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
And the reason the red wire is not attached is because I flashed my stock nand back to the console
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
Toggle over . I posted them
I will post more pics if you need me to. Also I have Windows 10 on my laptop and I wonder if it's actually writing timing files to the chip. JRUNNER won't let me flash my JRPROGRAMMER with firmware either. Or atleast I can't get it to. I've been using a nandx for everything. Nand read/write and putting timing files on the chip.
 
N

Newsk

Contributor
Messages
2,501
Reaction score
329
Is the chip lighting up while flashing it and jrunner conforming ? And yeah post pics of cpu rst , pll_bypass,post , clk. And routing .
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
Is the chip lighting up while flashing it and jrunner conforming ? And yeah post pics of cpu rst , pll_bypass,post , clk. And routing .
The chip lights up but it's dull when programming and it confirms in jrunner. I posted several pics and you should be able to toggle over to see em
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
run your pointer over to the right side of the top pic and you can see the rest
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
Does Retail Still Work?

You Damage Cpu_Rst Reason I Ask. And I’ve Never Seen That Spot Where It’s Soldered To.
Yes I was installing my original wiring and the pad did come off but it pulled up some so I removed it and used team xecuter alternate. There's another one on top I could use.
 
Yes I was installing my original wiring and the pad did come off but it pulled up some so I removed it and used team xecuter alternate. There's another one on top I could use.
And retail does boot like normal when I put original nand dump back in
 
N

Nemesis43

Newbie
Messages
13
Reaction score
0
And guys I know my soldering isn't the greatest. I've got to get something to be able to see what I'm doing better. Like a video camera or big magnifying glass
 
Top Bottom