What's new

Solved Jasper 16MB Help

tthorn

tthorn

Enthusiast
Messages
152
Reaction score
21
Points
70
Sin$
-7
Okay guys I am using a MTX SPI Nand flasher on my Jasper 16MB mobo. I used Jrunner to read my nands and all went smoothly and nands are the same. I created the ECC image. When I click on Write ECC I get this:

===================================================
Thursday, February 19, 2015 1:45:59 PM

J-Runner v0.3 Beta (7) Started

Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Jasper 16MB
Glitch Selected
Nand Initialization Finished
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 2.3
CB_A: 6750
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* this image will be valid *only* for: jasper (CB_6750)
* patching SMC...
Patching Jasper version 2.3 SMC at offset 0x12BA
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x11A3F (0x9A40 bytes) CB_A 6750
0x11A40..0x17A3F (0x6000 bytes) CD 8453
0x17A40..0xBFFFF (0xA85C0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc

Version: 01
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Failed to write 0x0 block
Failed to write 0x1 block
Failed to write 0x2 block
Failed to write 0x3 block
Failed to write 0x4 block
Failed to write 0x5 block
Failed to write 0x6 block
Failed to write 0x7 block
Failed to write 0x8 block
Failed to write 0x9 block
Failed to write 0xA block
Failed to write 0xB block
Failed to write 0xC block
Failed to write 0xD block
Failed to write 0xE block
Failed to write 0xF block
Failed to write 0x10 block
Failed to write 0x11 block
Failed to write 0x12 block
Failed to write 0x13 block
Failed to write 0x14 block
Failed to write 0x15 block
Failed to write 0x16 block
Failed to write 0x17 block
Failed to write 0x18 block
Failed to write 0x19 block
Failed to write 0x1A block
Failed to write 0x1B block
Failed to write 0x1C block
Failed to write 0x1D block
Failed to write 0x1E block
Failed to write 0x1F block
Failed to write 0x20 block
Failed to write 0x21 block
Failed to write 0x22 block
Failed to write 0x23 block
Failed to write 0x24 block
Failed to write 0x25 block
Failed to write 0x26 block
Failed to write 0x27 block
Failed to write 0x28 block
Failed to write 0x29 block
Failed to write 0x2A block
Failed to write 0x2B block
Failed to write 0x2C block
Failed to write 0x2D block
Failed to write 0x2E block
Failed to write 0x2F block
Failed to write 0x30 block
Failed to write 0x31 block
Failed to write 0x32 block
Failed to write 0x33 block
Failed to write 0x34 block
Failed to write 0x35 block
Failed to write 0x36 block
Failed to write 0x37 block
Failed to write 0x38 block
Failed to write 0x39 block
Failed to write 0x3A block
Failed to write 0x3B block
Failed to write 0x3C block
Failed to write 0x3D block
Failed to write 0x3E block
Failed to write 0x3F block
Failed to write 0x40 block
Failed to write 0x41 block
Failed to write 0x42 block
Failed to write 0x43 block
Failed to write 0x44 block
Failed to write 0x45 block
Failed to write 0x46 block
Failed to write 0x47 block
Failed to write 0x48 block
Failed to write 0x49 block
Failed to write 0x4A block
Failed to write 0x4B block
Failed to write 0x4C block
Failed to write 0x4D block
Failed to write 0x4E block
Failed to write 0x4F block
Done!
in 0:34 min:confused:ec

Does anyone know what the issue could be? My soldering is SOLID and I have rebooted everything twice. I have the two ORGINAL Nand dumps. When I boot my xbox I get nothing!
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,669
Reaction score
1,100
Points
1,045
Sin$
7
It's because you are using the matrix nand flasher, probably the firmware. Just ignore it, these errors are fake and your ecc should be flashed correctly. I have two matrix spi nand flashers and both do the same, and I haven't had a bad nand flash with neither one of them.
 
tthorn

tthorn

Enthusiast
Messages
152
Reaction score
21
Points
70
Sin$
-7
Cool thanks but when I try programming the Coolrunner Rev c with my Matrix flasher in Jrunner it says wrong ARM version????
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,669
Reaction score
1,100
Points
1,045
Sin$
7
That is because you cannot program the coolrunner with the matrix nand flasher. It's only a nand reader/writer not a cpld programmer. With a different firmware you might be able to do it, but you will have to find it, flash it and use software that is compatible with it. If you want the simplest solution I recommend making an lpt cable.
If you want to make an lpt cable take a look at this. I've added links to diagrams near the end of the first post in that thread.
 
tthorn

tthorn

Enthusiast
Messages
152
Reaction score
21
Points
70
Sin$
-7
Yup got it and now I am officially RGHd. Problem is I cannot find XeXMenu anywhere? Xbins is invite only. Anyone know or have a copy they can email me please?
 
Top Bottom
Login
Register