What's new

Tools J-Runner with Extras (Latest Dashboard) - Built in Timings, Bugfixes, and New Features!

  • Thread starter Octal450
  • Start date
  • Views 72,246
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
Glad you got it sorted!

Josh
 
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
I have not edited that functionality. It should be the same as other J-Runner versions.

Kind Regards,
Josh
 
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
Hi friends.

3.0.3 is now released as the September/October update.

SO WHAT HAS IT?

V3.0.3:
- Added: Inhibit errors while the xFlasher initializes and queue commands until its ready
- Added: SMC+ 1.1 ECCs
- Added: Corona ECCs fixed for RGH1.2 all configurations
- Added: Option to minimize application into tray icon
- Fixed: xFlasher not releasing file when read/write is aborted
- Fixed: xFlasher abort during writing did not display "Aborted"
- Fixed: Crashing after 4GB reading on some systems due to too many simultaneous operations
- Fixed: OS detection bug
- Fixed: NAND not reloaded after patching KV
- Fixed: Erroneous creation of empty "Logs" directory
- Fixed: Keygen false positive detection on some antivirus software
- Fixed: Issue with minimize/restore
- Fixed: Various bugs and usability issues
- Changed: Patching SMC Config is now seamless, no need to reload file
- Changed: Zephyr Glitch2 now build ECCs and XeBuild as Falcon, no more need to manually change
- Changed: Xenon Glitch2 now builds XeBuild as Falcon, no more need to manually change
- Changed: Winbond 2K options are now on the main XeBuild tab

Links as always in OP, and the update is delivered to auto-update.

Lastly, this update FIXES the ECC problems for my new RGH1.2 for Slim hack, and now you can use any ECCs properly.

Kind Regards,
Josh
 
Last edited:
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
November update is live on auto-update (11/23/2021, sorry for late post)

V3.0.3b:
- Added: Default dash selection to 17559 if no saved dash is present
- Fixed: Loop between dialogs and installer if Visual C++ Redistributable is cancelled or fails
- Fixed: Repeated clicking not ignored while xFlasher is initializing causing application to crash
- Fixed: Issue causing Extract Files to cause a crash after files are moved to serial folder
- Fixed: Various bugs and usability issues
- Changed: XDKbuild check box behavior

Enjoy. Small update this time, not had lots of time due to my health. Some more features and improvements upcoming.

Kind Regards,
Josh
 
SeaWorld

SeaWorld

Enthusiast
Messages
146
Reaction score
42
Points
95
Sin$
0
I'm glad you're keeping a pulse on JRunner! Now someone needs to remove the IE elements from jungleflasher :tongue:

Keep up the good work!
 
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
Happy New Year everyone!
We have worked very hard to bring you J-RUNNER WITH EXTRAS V3.1.0, the biggest update ever.

YouTube Demo

V3.1.0:
- Added: Improved functionality and speed of updater
- Added: Improved GUI
- Added: Refinements to Nand Info/KV Info panels
- Added: Ability to end the session and start a new one
- Added: RGH1.2 V2 timings for Slims
- Added: Donor Nand Creation and KV Decrypter tools
- Added: RGH3 Beta ECC and Freeboot build support
- Added: Better drivers for NAND-X and JRP
- Added: Improved XeLL Reloaded, built with the newest fixes
- Added: Better MTX USB Firmware Utility
- Added: Friendly console ID decoding in Nand Info
- Added: xFlasher support for Start Block and Length parameters
- Added: Improved LibUsb implementation
- Fixed: Buggy and broken behavior of IP configuration
- Fixed: Nand not being correctly initialized before CPU Key retrieval
- Fixed: Improved behavior when setting working directory
- Fixed: JTAG XeLL creation issue
- Fixed: Device detection issue
- Fixed: Update JRP firmware not prompting for hex if nand loaded
- Fixed: eMMC read ignoring iterations selected if opened from Advanced menu
- Fixed: Tray icon being left in system tray occaisionally
- Fixed: Various bugs and usability issues
- Changed: Reworked MTX USB Mode
- Changed: The program now checks for updates and starts much faster
- Changed: Improved spawn location of subforms
- Changed: Replaced annoying balloon on startup with taskbar icon

Kind Regards,
Josh
 
lilia

lilia

Enthusiast
Messages
25
Reaction score
6
Points
75
Sin$
0
thank you for what you do for the community you are fantastic. I wish you a happy new year
 
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
My pleasure guys, thank you.

Kind Regards,
Josh
 
J

jetuaime81

Enthusiast
Messages
90
Reaction score
6
Points
55
Sin$
7
Thankyou very much. I converted by 4gb corona to chip free rgh 3 install.

One thing to inform. In 3.1.0 corona 4gb, the drive size 3588 MB is not shown. Actually in old jrunner this is an indication that connection is wrong or not good soldering, so i wasted some time on my wiring / card reader etc. Not a deal breaker i guess but still passing the info. Cheers octal✌️
 
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
Hi,

Another quick end of the year update
:D

V3.1.0b:
- Added: File drag and drop for Donor Nand Creator and KV Decrypter
- Added: Custom SMC Config selection in Donor Nand Creator
- Fixed: Patches not being reset properly
- Fixed: Invalid state causing Donor Nand Creator to not recognize console type
- Fixed: New XeLL not launching ELF files correctly
- Fixed: Post V3.1.0 release bugs

Thanks very much for the bug reporting, V3.1.0 was a massive update so naturally there were a few issues to work out.

J jetuaime81 I tested here and it works. So please provide some screenshot or reproduce steps. I did not change that info grabbing. If the soldering is bad, it will not the thing.

Thanks for the kind words!

Kind Regards,
Josh
 
J

jetuaime81

Enthusiast
Messages
90
Reaction score
6
Points
55
Sin$
7
Hi,

Another quick end of the year update
:D

V3.1.0b:
- Added: File drag and drop for Donor Nand Creator and KV Decrypter
- Added: Custom SMC Config selection in Donor Nand Creator
- Fixed: Patches not being reset properly
- Fixed: Invalid state causing Donor Nand Creator to not recognize console type
- Fixed: New XeLL not launching ELF files correctly
- Fixed: Post V3.1.0 release bugs

Thanks very much for the bug reporting, V3.1.0 was a massive update so naturally there were a few issues to work out.

J jetuaime81 I tested here and it works. So please provide some screenshot or reproduce steps. I did not change that info grabbing. If the soldering is bad, it will not the thing.

Thanks for the kind words!

Kind Regards,
Josh
Sorry i didnt take any video of it.

Only issue with me was the removable drive size was not being shown '3588 mb'; then i opened old jrunner and there it showed the size. So i continued to use 3.1.0 to read, create and write rgh3 nands. No issues and my xbox boots just fine.

If drive shows properly with you and others, then maybe its just my pc (windows or something corrupt). You can ignore my issue ?.

Cheers josh ?
 
P

Plastic

Newbie
Messages
2
Reaction score
0
Points
35
Sin$
0
Hi Josh,

I just used your latest update to convert my trinity to RGH3. That all went well but your version of XeLL Reloaded you are bundling is unable to negotiate an IP from my router. The previous version of XeLL on the xbox had no issues getting an IP. On the dashboard I have zero issues getting an IP from my router.

Also, I had issues installing the new signed drivers for my jr programmer. I had to install different drivers the old way. I am on windows 10 64bit.

Thanks,

Plastic
 
Last edited:
R

rasoulia

Enthusiast
Messages
10
Reaction score
1
Points
55
Sin$
0
In recent update program not run just show icon for a second and then close it
Windows 11 latest version all c++ installed
Old version work fine but new version not work and i don'r have old version
 
Last edited:
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
P Plastic We fixed issues with the IP grabbing. If you have VMware or other funny adapters, you need to set your IP default back.

R rasoulia I can't reproduce that. Do you get error.log or something? Is Windows defender set to ignore that path? I have reports that Windows 11 work fine so far.

Kind Regards,
Josh
 
R

rasoulia

Enthusiast
Messages
10
Reaction score
1
Points
55
Sin$
0
Octal450 Octal450 no just show icon for a second and then close it. reinstall all c++ and net framework but still not working. i think i have to reinstall windows maybe fix the problem (sorry for my bad english)
 
P

Plastic

Newbie
Messages
2
Reaction score
0
Points
35
Sin$
0
P Plastic We fixed issues with the IP grabbing. If you have VMware or other funny adapters, you need to set your IP default back.

R rasoulia I can't reproduce that. Do you get error.log or something? Is Windows defender set to ignore that path? I have reports that Windows 11 work fine so far.

Kind Regards,
Josh
I'm talking about the bundled version of XeLL. It doesn't negotiate an IP from my router. So I wouldn't even be able to use the IP CPU Key option in J-Runner. This has nothing to do with J-Runner connecting to the 360.

XeLL gets stuck on requesting dhcp.
 
Top Bottom
Login
Register