T
TheDalekDoctor
Newbie
This is the weirdest thing...
*I've checked with a multimeter and redone the soldering multiple times
*Made sure the Jr-Programmer v2 is not in bootloader mode
*Made sure it is in NAND programming mode
*Made sure the drivers for it are installed and working (hell J-Runner identifies it)
*Made sure J-Runner is in admin mode
*Tested J-Runner under compatibility mode
*Disabled signed drivers enforcement
*Made sure the console was plugged in and in stand by mode (the board is a Falcon btw)
Even after all of that, I'm still getting errors from J-Runner when I press the little "?" to find the board type (I've posted pictures/logs below).
Am I missing something?
//Log//
Wednesday, February 3, 2021 10:28:03 PM
J-Runner v0.3 Beta (8) Started
It's advised to run in administrator mode on Windows 8
Connection Error
Filechecks disabled - No Filechecks carried out
Checking Console..
Device Not Found.
Can not continue
Checking Console..
Device Not Found.
Can not continue
*I've checked with a multimeter and redone the soldering multiple times
*Made sure the Jr-Programmer v2 is not in bootloader mode
*Made sure it is in NAND programming mode
*Made sure the drivers for it are installed and working (hell J-Runner identifies it)
*Made sure J-Runner is in admin mode
*Tested J-Runner under compatibility mode
*Disabled signed drivers enforcement
*Made sure the console was plugged in and in stand by mode (the board is a Falcon btw)
Even after all of that, I'm still getting errors from J-Runner when I press the little "?" to find the board type (I've posted pictures/logs below).
Am I missing something?
//Log//
Wednesday, February 3, 2021 10:28:03 PM
J-Runner v0.3 Beta (8) Started
It's advised to run in administrator mode on Windows 8
Connection Error
Filechecks disabled - No Filechecks carried out
Checking Console..
Device Not Found.
Can not continue
Checking Console..
Device Not Found.
Can not continue