To flash the LiteOn all you need is the SATA
cable...the USB Xtractor is just to get the key off your DVD drive before you flash it. You can use the JungleFlasher program to get the Key...you CAN NOT use the one from USBXtractor By Maximus :: Official HomePage, if your running x64 bit system. The software you need to use to to get the DVD key is JungleFlasher. Here's a link to the software.
The only thing I had to do diffrent was right before you type in DOSFLASH it tells you to turn off your drive...I had to turn mine ON in order to get the computer to see the drive. Then it was smooth sailing.
:thumbup:Give thanks to this guy if it works, and if I helped don't be afraid to hit thanks!!:thumbup:
I used parts of tutorials. but this way will only work for xbox 360s in which the NAND has been dumped and the CPU key has been found for decryption purposes. (jtag)
And if you don't know what your NAND is, this prolly wont work for you....
In short, you load up your dumped NAND in Flash Tool, make sure you have your CPU key loaded in the keys section. Your DVD key will appear in the keyvault section, copy it down.
-Now load up Jungle Flasher and go to the Firmware Tool 32 tab.
-Load up the custom firmware for your particular Lite-On Drive in the Target section.
-Click Manual Spoofing and enter the DVD key you wrote down earlier. and click ok.
-save to file Lite_CFW.bin.