Solved Is my console RGH/JTAG-able?

[Rosscoe]

I'm have a black slim xbox 360 running dashboard: 2.0.17511.0 and it is also a trinity (10.83A)
Just wondering if I could get a jtag or RGH on this console ?

 

[Noobert]

I'm have a black slim xbox 360 running dashboard: 2.0.17511.0 and it is also a trinity (10.83A)
Just wondering if I could get a jtag or RGH on this console ?

You can RGH it with an Ace v3.

 

[Rosscoe]

You can RGH it with an Ace v3.

Could you tell me what else is needed to do the RGH process? I'm new to this

 

[Noobert]

Could you tell me what else is needed to do the RGH process? I'm new to this

You need a JR Programmer v2, and a Ace v3.

Here are the install points for both:
https://i.imgur.com/Rv4SR0r.jpg

A pretty simple tutorial would be:

1. Use the JR Programmer v2 to get two nand reads.
2. Create and write the ECC to the console.
3. Solder the Ace v3.
4. Boot the console and get your CPU Key from Xell.
5. Type the CPU Key into JRunner.
6. Create and write the XeBuild image.

Here's a video tutorial:

 

[Rosscoe]

You need a JR Programmer v2, and a Ace v3.

Here are the install points for both:
https://i.imgur.com/Rv4SR0r.jpg

A pretty simple tutorial would be:

1. Use the JR Programmer v2 to get two nand reads.
2. Create and write the ECC to the console.
3. Solder the Ace v3.
4. Boot the console and get your CPU Key from Xell.
5. Type the CPU Key into JRunner.
6. Create and write the XeBuild image.

Here's a video tutorial:

Wow, thank you for that help. Much appreciated!!

 

[Noobert]

Wow, thank you for that help. Much appreciated!!

Anytime, feel free to reply if you need any help with it.

 

[Rosscoe]

Anytime, feel free to reply if you need any help with it.

Will I need to buy any cables also? Or do they come with the cables to solder?

 

[Noobert]

Will I need to buy any cables also? Or do they come with the cables to solder?

They'll both come with all the cables you'll need .