What's new

Solved Is it possible to dual nand a phat with a demon and an ACE v3?

  • Thread starter Adrianne
  • Start date
  • Views 1,240
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
I have a friend who has a phat that wants me to mod. He said he bought the demon and wanted me to install it. Would it be possible to use rgh 1.2 with the demon using an Ace v3?
 
S

shinda

Retired
Retired
Messages
2,353
Reaction score
1,379
I'm about 99% sure you need an xecuter chip to use a demon. Also I believe you can use 1.2 with the Ace.
 
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
I'm about 99% sure you need an xecuter chip to use a demon. Also I believe you can use 1.2 with the Ace.
Ahh ok, I told him to cancel the order. Should I tell him to order the squirt dual nand chip? I don't know if it's compatible for phats though.
 
S

shinda

Retired
Retired
Messages
2,353
Reaction score
1,379
Ahh ok, I told him to cancel the order. Should I tell him to order the squirt dual nand chip? I don't know if it's compatible for phats though.
Couldn't tell you about the squirt chip, I'd honestly just say get the demon with a xecuter chip.
 
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
Couldn't tell you about the squirt chip, I'd honestly just say get the demon with a xecuter chip.
damn, i'll have to ask this forum about the squirt. The demon is not compatible with the rgh 1.2 :frown:
 
H

HuskerHeaven

when I took his glass of champagne...
Staff
Messages
8,251
Reaction score
3,380
damn, i'll have to ask this forum about the squirt. The demon is not compatible with the rgh 1.2 :frown:
The demon is compatible with 1.2. No need for the en wire.
 
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
The demon is compatible with 1.2. No need for the en wire.

He already canceled the order. Do you happen to have the diagram for the squirt dual nand for phats though?
 
H

HuskerHeaven

when I took his glass of champagne...
Staff
Messages
8,251
Reaction score
3,380
He already canceled the order. Do you happen to have the diagram for the squirt dual nand for phats though?
No. I'm sure I could find some though. But you would be much better off with the demon. It's the one time a qsb is really nice. Direct wire dual nand can get messy.
 
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
No. I'm sure I could find some though. But you would be much better off with the demon. It's the one time a qsb is really nice. Direct wire dual nand can get messy.

Mind finding me a diagram please? :smile:
 
N

NETO0214

Banned
Messages
903
Reaction score
185
Mind finding me a diagram please? :smile:

Here's the diagram





U will need to cut the trace close to the nand chip

Also u will have to use the stby_clk in order to make it work

First one is always the hardest after that it gets easy to do
 
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
Here's the diagram





U will need to cut the trace close to the nand chip

Also u will have to use the stby_clk in order to make it work

First one is always the hardest after that it gets easy to do
Thanks for this :smile: One question: Where do I connect the green and yellow from the last picture? Thanks for the diagram.
 
N

NETO0214

Banned
Messages
903
Reaction score
185
Thanks for this :smile: One question: Where do I connect the green and yellow from the last picture? Thanks for the diagram.

CE (1) goes on the bottom u can see pic 2

CE (2) goes on the chip CE_B on the squirt

I'll pm u link of the thread from 15432
 
A

Adrianne

Enthusiast
Messages
383
Reaction score
58
CE (1) goes on the bottom u can see pic 2

CE (2) goes on the chip CE_B on the squirt

I'll pm u link of the thread from 15432

Thank you so much for clearing that up :smile:
 
Top Bottom