What's new

Tutorial How to Update Your RGH/Jtag to 17489

  • Thread starter dZ EroSioN
  • Start date
  • Views 1,187
D

dZ EroSioN

Newbie
Messages
6
Reaction score
2
Points
45
Sin$
7
I'm making this so people can stop bricking their consoles...

Things to Download
J-Runner 17489
Download | Virus Scan

Simple 360 Nand Flasher
Download | Virus Scan

****************
Before Starting, Remove your Current Stealth from your Launch.ini.
If you don't you may be stuck on the Xbox Logo after Boot.
****************
Extract the .RAR for Nand Flasher.
Make sure your USB Drive is FAT32.
Place the Simple 360 Nand Flasher, on the root of the USB.
Go to XeX Menu, and load the Default.xex for Nand Flasher.
You'll be presented with this screen:
Spoiler
Hit X to Dump the Entire Nand.

When it finishes, you'll be presented with this:
Spoiler
Hit any button on your controller, and when you're back at the Dash, take out the USB Drive.
You'll see 4 Files now in the Nand Flasher Folder:

Extract and Open J-Runner.
Hit the Open Source button, and choose the flashdmp.bin file on your USB.
If you don't know the CPU Key, open the cpukey.txt on your USB.

After you type in the CPU Key, hit the Re-Init button next to the CPU Key.

At the bottom right, hit J-Runner Settings:


Copy the Settings exactly like below:


Hit OK.

After you hit OK, Go back into the J-Runner RAR.
In the RAR file, Go to J-Runner v3 > XeBuild
Look for launch.xex + lhelper.xex.
Copy those two files to your Desktop.

Drag the two files on your Desktop to the Already Extract J-Runner v3 Folder.
Place them in the XeBuild Folder, and Overwrite when asked.

If that was Confusing (Sorry), look at this:
Spoiler

In the top right, select the correct settings for your RGH.
If it has a CR4 in it, select RGH2 > CR4. If it's a regular RGH2, select RGH2. If it's a Jtag, select Jtag, etc...

If you do not choose the correct settings, you risk Bricking your Console.

After you choose the correct settings, make sure Dash Version is 17489:
Spoiler

Once everything is correct, hit on the button Create XeBuild.
You'll be presented with this:


Once that is done, in the bottom right, hit Show Working Folder.
You'll see a file called updflash.bin.
Drag that updflash.bin onto the Root of your USB Flash Drive.

Once that file is on the USB, plug it into the RGH.

At this point, the only things that you should have connected are:
- Power Cable
- HDMI/AV
- USB Flash Drive

Now, boot into Xell, by hitting the Eject Button on your Console.
Once it sees the updflash.bin, you'll see this message:


So if you do NOT want to update your console, then turn it off, but since you're on this thread, I assume you wanted to update it. So do not touch anything.

After 10 Seconds, it'll start to write the nand, and when it finishes you'll see this:


So, power down the console, and unplug the USB Flash Drive.
Plug back in your Hard Drive, Controller, etc..

Boot the console as normal, and you'll be presented with the 360 Setup, as if you bought a brand new console:
Spoiler
If you're not presented with the new setup screen, it's no big deal. Some might get it, and some might not.

When you're done with the setup, if you go to Settings and Console Info, you'll see you're officially updated, and on 17849.

Congratulations on Successfully updating your console.

You'll more than likely need to do an Avatar Update. To do the Avatar Update, please follow the guide that Sombra made by Clicking Here.

If you'd rather do the Manual Version, then please follow this guide:
Spoiler

Thank you to HuskerHeaven for the Updated J-Runner Download, and thank you to Xbox Live Stealth for keeping XeBuild up to date!
 
Top Bottom
Login
Register