MintModz
Newbie
Things you will need to Update
-----------------------------
1. Your CPU Key
2. A Copy of Your Nand Which can Be Called Multiple Things! (updflash.bin, nand.bin, nanddump.bin, and flashdmp.bin!) You can retrieve your nand by Flash360
3. And you will need the latest version of J-runner! All downloads will be at the bottom!
Now Let's Begin this tutorial! (:
Step 1: Open J Runner up and go to where it says "Source File" hit browse and open up your nand image!
Step 2: Now go where is says CPU Key enter your CPU Key and hit the button Re Int you should see it load at the left and it should say "Nand Initalization Finished"
Step 3: Now you need to select what type on Jtag/RGH you have. Reminder: If you have a RGH you MUST choose if you have a RGH1 OR 2 INSTALL!
Step 4: Now go to select dash and go to Add Dash it will pop up for you to type in 16203.
Step 5: Only do this step if you are running a RGH if running a Jtag Ignore this. You will need to check the LDV Info in the your KV_Info. You are going to need to remember the number it shows. Now go to Advance and find "Look Down Value" Change itm one number higher then press OK.
Step 6: Now that you have done all of the steps above hit Create Image it should load and be successful. If you get an error go back to the steps and make sure you did everything correctly.
Step 7: There will be a Folder on your desktop with the new nand image! Now go flash it to your JTAG/RGH and BAM YOUR ON 16203!
Downloads:
flash 360- mediafire.com/?mmiwvhwmmje
J-runner : http://bit.ly/1iiqc4w
Download Core Pack: http://bit.ly/K8z3OP
Download 16537 Additional Files: http://goo.gl/HZff44
Demon Drivers: http://goo.gl/mhPPG
video tutorial-
-----------------------------
1. Your CPU Key
2. A Copy of Your Nand Which can Be Called Multiple Things! (updflash.bin, nand.bin, nanddump.bin, and flashdmp.bin!) You can retrieve your nand by Flash360
3. And you will need the latest version of J-runner! All downloads will be at the bottom!
Now Let's Begin this tutorial! (:
Step 1: Open J Runner up and go to where it says "Source File" hit browse and open up your nand image!
Step 2: Now go where is says CPU Key enter your CPU Key and hit the button Re Int you should see it load at the left and it should say "Nand Initalization Finished"
Step 3: Now you need to select what type on Jtag/RGH you have. Reminder: If you have a RGH you MUST choose if you have a RGH1 OR 2 INSTALL!
Step 4: Now go to select dash and go to Add Dash it will pop up for you to type in 16203.
Step 5: Only do this step if you are running a RGH if running a Jtag Ignore this. You will need to check the LDV Info in the your KV_Info. You are going to need to remember the number it shows. Now go to Advance and find "Look Down Value" Change itm one number higher then press OK.
Step 6: Now that you have done all of the steps above hit Create Image it should load and be successful. If you get an error go back to the steps and make sure you did everything correctly.
Step 7: There will be a Folder on your desktop with the new nand image! Now go flash it to your JTAG/RGH and BAM YOUR ON 16203!
Downloads:
flash 360- mediafire.com/?mmiwvhwmmje
J-runner : http://bit.ly/1iiqc4w
Download Core Pack: http://bit.ly/K8z3OP
Download 16537 Additional Files: http://goo.gl/HZff44
Demon Drivers: http://goo.gl/mhPPG
video tutorial-
thanks guys
hope this helped you!
hope this helped you!