What's new

Tutorial How to Update A JTAG, RGH, or R-JTAG Console

  • Thread starter Brother Jordan
  • Start date
  • Views 100,668
Doodle210

Doodle210

Everything in this world exists to wear you down.
Hardened Veteran Bright Idea Stickied
Messages
5,822
Reaction score
2,848
Points
840
Sin$
0
Thanks for this! Why is this not pinned?_?
 
airman

airman

Newbie
Messages
9
Reaction score
1
Points
45
Sin$
0
Hello, my friend is stuck at step 16
16. The image should begin to flash (rawflash v4 initiated, etc)
I plug the USB stick in, press the eject button, XELL loads up and then is like searching for the update but nothing happens...
USB stick is formatted to FAT32 and he says that up to step 16 has done everything by the book.
Any ideas ?

And also where do i find the SystemUpdate_16547_USB files ?
 
P

pawanjounkani

Newbie
Messages
1
Reaction score
0
Points
35
Sin$
7
Update your JTAG/RGH to the Latest Dashboard By iMoses

Current Dashboard: 16537

Things you will need:
-XeBuild GUI 2.091
-Backup NAND
-CPU Key
-USB Flash Drive (Formatted to FAT32)
-Flash360(if you don't have your NAND backed up)

*Special Corona 4GB Instructions In Spoiler*

Instructions:
Skip to step 5 if you already have a backup NAND and your CPU key
1. Boot into XeLL (with the console turned off, press the eject button)
2. Copy CPU key down onto notepad (if you are connected via ethernet to your network, simply type in the IP address and then copy the CPU key from there; if you are not, manually copy the code)
3a. If you are connected to the network page (for XeLL), click "download" next to the "Raw Flash" section
3b-1. If you are not connected to the network, run flash360 on your Xbox (place on USB drive and launch using XeX menu, FSD, etc)
3b-2. Press X to backup your NAND
3b-3. Once completed, exit the application
4. Power down the Xbox (and remove flash drive if you used flash360)
5. Launch XeBuild GUI 2.091
6. Click open next to source file and select your flashdmp.bin
7. Click save next to output path and select the root of your flash drive (save as updflash)
8. In the keys section, paste your CPU key
9. At the bottom right of the screen, press check KV (this makes sure the CPU key is correct and will properly build your image)
10. In kernel version, select 2.0.16537 (if not already selected)
11. Double check build type, motherboard, XeLL, and SMC Hack (JTAG ONLY)
12. Press "Generate Hacked Image"
13. Once completed, unplug your flash drive
14. Plug your flash drive into the Xbox (with the console OFF)
15. Boot into XeLL (press eject button with the console off)
16. The image should begin to flash (rawflash v4 initiated, etc)
17. Once complete, power down the Xbox
18. Unplug flash drive
19. Power on the Xbox

Congratulations, you have successfully updated to dashboard 16357

Skip to step 9 if you already have a backup NAND and your CPU key
1. Boot into XeLL (with the console turned off, press the eject button)
2. Copy CPU key down onto notepad (if you are connected via ethernet to your network, simply type in the IP address and then copy the CPU key from there; if you are not, manually copy the code)
3. Download Simple 360 NAND Flasher 1.2
4. Place the Simple 360 NAND Flasher folder on your flash drive (after you extracted it from the download)
5. Launch the default.xex inside the Simple 360 NAND Flasher folder (using xex menu, fsd, etc)
6. Press X to backup the NAND
7. Once complete, if the console does not shut down automatically, power down the console
8. Unplug the flash drive from the xbox and plug into your computer
9. Launch XeBuild GUI 2.091
10. At the top of XeBuild, disable failsafe mode
11. Switch to advanced mode
12. Under Misc options, check off "Open Parameter/Argument editor prior to starting xeBuild/Python"
13. Click open next to source file and select your flashdmp.bin (if you get an error, click yes)
14. Click save next to output path and select the root of your flash drive (save as updflash)
15. Under Build type, select "Freeboot (RGH 2.0)"
16. Under Motherboard, select "Corona"
17. In the keys section, paste your CPU key
18. In kernel version, select 2.0.16537 (if not already selected)
19. Press "Generate Hacked Image" (if you get an error, click yes)
20. When the Parameter/Argument Editor opens, under "New Parameter", change "corona" to "corona4g"
21. Click "Save the new parameters and run xeBuild/Python"
22. Once completed, unplug your flash drive
23. Plug the flash drive into your console
24. Turn on with power button (DO NOT BOOT INTO XELL)
25. Launch the default.xex inside the Simple 360 NAND Flasher folder (using xex menu, fsd, etc)
26. Press A to flash the image
27. Once completed, let the app turn off the console (You will mess up the console if you do not let it shut off by itself)
28. Unplug your flash drive
29. Power on the Xbox
Congratulations, you have successfully updated to dashboard 16357


When I Run Flash 360 xex, it prompt a msg "SFC init Failure" with a code error 0*00000001 with a command "Press any key to go back".
When I Run "Simple Nand Flash" and then run XeBuild and open "flashdmp.bin", it gives a error "if it is big or small block nand, do u want to continue anyway? (this is a sign that your nand is not properly dumped)"

Plz help... Neither Flash 360 nor Simple Nand Flash solve my prob..and my Dashboard didn't updated to 2.0.16747.0 
When I Run Flash 360 xex, it prompt a msg "SFC init Failure" with a code error 0*00000001 with a command "Press any key to go back".
When I Run "Simple Nand Flash" and then run XeBuild and open "flashdmp.bin", it gives a error "if it is big or small block nand, do u want to continue anyway? (this is a sign that your nand is not properly dumped)"

Plz help... Neither Flash 360 nor Simple Nand Flash solve my prob..and my Dashboard didn't updated to 2.0.16747.0
 
C

circlebooster

Newbie
Messages
3
Reaction score
1
Points
45
Sin$
7
Hi, I've received the following error when following the Corona 4GB instructions. I am following those instructions because I have a Corona and flash360 gives me an error message. I am fairly new to this so it is possible that I do not have a Corona 4GB.

"Checking game:\updflash.bin for spare data...No spare data detected!

Warning! You are about to flash an image that don't contain SPARE data to a machine that requires it!

If you know what you are doing press start to continue..."
 
Last edited:
oblivioncth

oblivioncth

Mr. Cloth
Mr. Nice Guy MotM TotM
Messages
7,015
Reaction score
2,143
Points
820
Sin$
7
Hi, I've received the following error when following the Corona 4GB instructions. I am following those instructions because I have a Corona and flash360 gives me an error message. I am fairly new to this so it is possible that I do not have a Corona 4GB.

"Checking game:\updflash.bin for spare data...No spare data detected!

Warning! You are about to flash an image that don't contain SPARE data to a machine that requires it!

If you know what you are doing press start to continue..."
Are you using an image you pulled from the console or your original NAND dump?
 
C

circlebooster

Newbie
Messages
3
Reaction score
1
Points
45
Sin$
7
Are you using an image you pulled from the console or your original NAND dump?
Hey Oblivioncth

Thanks for your reply. Having checked the size of the dump I realised I didn't have a 4g.... Went ahead with the instructions as listed and updated successfully.
 
RaufBaloch

RaufBaloch

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
7
something went wrong... How can I write back my flashdmp to the console?
 
x S132T0NE x

x S132T0NE x

Flat Gallop!
Messages
932
Reaction score
381
Points
125
Sin$
0
I Get the no spare data detected message in simple 360 flasher, help?
 
Last edited:
x S132T0NE x

x S132T0NE x

Flat Gallop!
Messages
932
Reaction score
381
Points
125
Sin$
0
Yo i have done everything, but when i test my connection i get errors?
 
Top Bottom
Login
Register