Gamesaves How to Rip Games Straight from Your Xbox 360

[whiteforlife]

This Guide was written by Viirus NOT me

Requirements
-Xbox Backup Creator
http://www.megaupload.com/?d=8YX583DZ

-DVD Drive flashed with iXtreme v1.6
-A way to power your drive
-SATA Card or compatible on-board SATA
-Xbox 360, duh!

--------------------------------------------------------------------------

Due to an issue that affects the Liteon ix16 it is advised that you start
XBC without a DVD in the drive.
------------------------------------------------------------------------------


1. First off, you're going to need to open your Xbox, if you don't know how, watch this video.

[ame="http://www.youtube.com/watch?v=qAGAYPtqCWM"]You Tube[/ame]​

2. After your Xbox is open, shutdown your PC and connect your DVD drive via SATA cable to your computer. I'm using an on-board SATA and it works just fine for me.

3. Connect your Xbox power cable and plug in the AV cable.

4. Power on the Xbox and open the drive with a pen or something small.

5. Next pull the power cable out of the back of the DVD drive and close the tray about half way. The green light on the Xbox should be blinking steadily. Plug your DVD back in, but make sure you plug it in the right way, if you don't, it will brick

6. Turn your PC on and boot into Windows. If windows seems to be booting slow, just press the eject button on your drive and close it. Don't worry, it's still in 0800 mode.

7. The drive should now be detected and have been automatically assigned a letter.

8. Open the disc tray and put in your game.

9. Close your disc tray and open up XBC

10. Wait for the disc to be read and click start, name the file and save it where you want it.

11. It should take about 10-20 minutes to read the game, so just sit back and relax.

12. Run through AGBX and burn to backup.

__________________

 

[Rhino29]

Do you have to create a .dvd file with the appropriate information just in notepad? and Save it as

file name - game.dvd
save as type - all files
Encoding - Unicode?

 

[iTz Aaron]

Do you have to create a .dvd file with the appropriate information just in notepad? and Save it as

file name - game.dvd
save as type - all files
Encoding - Unicode?

i dnt do this i go into AGBX360 and then load the iso file and click launch if it stealth verifies then u have the dvd file created for u

 

[masterx02]

Thanks, I have a spare drive that i may be able to do this with. I need to spoof it though