What's new

Unsolved How to replace blu-ray drive ps3 slim

  • Thread starter MocahNutz
  • Start date
  • Views 587
M

MocahNutz

I don't give a #2!!
Messages
205
Reaction score
79
I have a slim CECH2001a. The disc drive does not spin the disc, accepts and ejects disc fine. I have disassembiled the drive and found the logic board had gotten wet at some point in time. I do not know how I just got the console to repair. Anyway if I get a new disc drive with a new logic board do I need to do anything to "marry" the logic board/drive?
 
F

Falcon

PlayStation Master
Messages
1,804
Reaction score
1,038
I have a slim CECH2001a. The disc drive does not spin the disc, accepts and ejects disc fine. I have disassembiled the drive and found the logic board had gotten wet at some point in time. I do not know how I just got the console to repair. Anyway if I get a new disc drive with a new logic board do I need to do anything to "marry" the logic board/drive?
You need the logic board And to get a new drive to work on your console you need to go to 3.55 so the old logic board needs to work to get a new dvd drive.
 
M

MocahNutz

I don't give a #2!!
Messages
205
Reaction score
79
So if the old logic board, I am talking about the small circuit board in the blu ray drive, is trashed then there is no way to get a new drive to work?
 
F

Falcon

PlayStation Master
Messages
1,804
Reaction score
1,038
So if the old logic board, I am talking about the small circuit board in the blu ray drive, is trashed then there is no way to get a new drive to work?
nop And im 90% sure
 
M

MocahNutz

I don't give a #2!!
Messages
205
Reaction score
79
Ok not gonna disagree with you BUT I have found videos on the internet of replacing the drive and board and remarrying them. BUT none are detailed enough in my opinion to follow because they leave voids or steps out and makes it confusing. Thank you man for your help though.
 
Top Bottom