Atlas
С.Т.А.Л.К.Е.Р.
VIP
Retired
Hidden Devils
What you need:
[INFO ABOUT FUSION]
[DOWNLOAD FOR FUSION 1.0.9]
NOTE: RGLoader's latest stable release that i have personally come across is 0v400. It has support for JTAG, RGH, and RGH2 consoles and is based on the 16537 dash. It also is based on a newer XDK kernel compared to Fusion. However, if you search around you could possibly find newer versions of RGLoader nowadays that even offer compatibility for R-JTAG consoles.
[INFO AND DOWNLOAD FOR RGLoader 0v400]
Procedure:
1. Turn on Homebrew 360 that is running TX Fusion or RGLoader. Turn on Laptop.
2. Open 360 Command Prompt either by following the .gif below or going to this location: "C:\Program Files (x86)\Microsoft Xbox 360 SDK\bin\win32\xdkenv.bat" If both fail, just search your C Drive for "xdkenv.bat"
3. Type the following within said command prompt:
4. Replace 444 with your console's IP address.
5. Replace 555 with the quality of your choice:
6. Feel free to change the "yourvid.wmv" to whatever you wish, but make sure it ends in .wmv.
EXAMPLE:
7. Play whatever game you wish until you are ready to record. Once you are ready to record, press ENTER on your keyboard. When you wish to cease recording, press ENTER again. Allow time for the clip to be saved onto your laptop. Once clip has finished being saved onto your laptop, simply search for it by name to locate it as it may be saved in your temp folders or elsewhere on your C Drive.
Examples of my own recordings:
- A Homebrew 360 (Either a JTAG, RGH, or RGH2.... R-JTAG cannot be used for this UNLESS you are using a newer version of RGLoader (some version past 0v400 most likely). Check each RGLoader version's Readme file to see if R-JTAG is supported.
- A laptop or Computer
- The 360 SDK installed onto your computer or laptop (I am not able to post a link to this software because it is considered "warez." That being said, if you search around for XDKSetupXenon21173.4 you'll be good to go)
- Both your Homebrew Console and Laptop/Computer running at the same time on the same network (can be wired or wireless, just as long as they are on the same network)
- Hacked XDK software installed on your Homebrew 360 (Either TX Fusion 1.0.9 or RGLoader 0v400)
[INFO ABOUT FUSION]
[DOWNLOAD FOR FUSION 1.0.9]
NOTE: RGLoader's latest stable release that i have personally come across is 0v400. It has support for JTAG, RGH, and RGH2 consoles and is based on the 16537 dash. It also is based on a newer XDK kernel compared to Fusion. However, if you search around you could possibly find newer versions of RGLoader nowadays that even offer compatibility for R-JTAG consoles.
[INFO AND DOWNLOAD FOR RGLoader 0v400]
Procedure:
1. Turn on Homebrew 360 that is running TX Fusion or RGLoader. Turn on Laptop.
2. Open 360 Command Prompt either by following the .gif below or going to this location: "C:\Program Files (x86)\Microsoft Xbox 360 SDK\bin\win32\xdkenv.bat" If both fail, just search your C Drive for "xdkenv.bat"
3. Type the following within said command prompt:
Code:
xbmovie /X:444 /F:555 yourvid.wmv
4. Replace 444 with your console's IP address.
5. Replace 555 with the quality of your choice:
6. Feel free to change the "yourvid.wmv" to whatever you wish, but make sure it ends in .wmv.
EXAMPLE:
Code:
xbmovie /X:192.168.1.108 /F:3 myvideo1.wmv
7. Play whatever game you wish until you are ready to record. Once you are ready to record, press ENTER on your keyboard. When you wish to cease recording, press ENTER again. Allow time for the clip to be saved onto your laptop. Once clip has finished being saved onto your laptop, simply search for it by name to locate it as it may be saved in your temp folders or elsewhere on your C Drive.
Examples of my own recordings: