What's new

Tutorial How to Record Gameplay Without a Capture Card [JTAG/RGH/R-JTAG]

A

Atlas

Local Rivethead
VIP
Retired
Messages
16,688
Reaction score
13,816
What you need:
  • A Homebrew 360 (Either a JTAG, RGH, or RGH2.... R-JTAG cannot be used for this UNLESS you are using a newer version of RGLoader (some version past 0v400 most likely). Check each RGLoader version's Readme file to see if R-JTAG is supported.
  • A laptop or Computer
  • The 360 SDK installed onto your computer or laptop (I am not able to post a link to this software because it is considered "warez." That being said, if you search around for XDKSetupXenon21173.4 you'll be good to go)
  • Both your Homebrew Console and Laptop/Computer running at the same time on the same network (can be wired or wireless, just as long as they are on the same network)
  • Hacked XDK software installed on your Homebrew 360 (Either TX Fusion 1.0.9 or RGLoader 0v400)
NOTE: TX Fusion 1.0.9 is the latest version of Fusion. Fusion does work nicely, but it is based on a much older dash (13146) and is no longer updated. Not to mention, Fusion only supports RGH'd consoles.
[INFO ABOUT FUSION]
[DOWNLOAD FOR FUSION 1.0.9]

NOTE: RGLoader's latest stable release that i have personally come across is 0v400. It has support for JTAG, RGH, and RGH2 consoles and is based on the 16537 dash. It also is based on a newer XDK kernel compared to Fusion. However, if you search around you could possibly find newer versions of RGLoader nowadays that even offer compatibility for R-JTAG consoles.
[INFO AND DOWNLOAD FOR RGLoader 0v400]


Procedure:

1. Turn on Homebrew 360 that is running TX Fusion or RGLoader. Turn on Laptop.

2. Open 360 Command Prompt either by following the .gif below or going to this location: "C:\Program Files (x86)\Microsoft Xbox 360 SDK\bin\win32\xdkenv.bat" If both fail, just search your C Drive for "xdkenv.bat"



3. Type the following within said command prompt:
Code:
xbmovie /X:444 /F:555 yourvid.wmv


4. Replace 444 with your console's IP address.

5. Replace 555 with the quality of your choice:



6. Feel free to change the "yourvid.wmv" to whatever you wish, but make sure it ends in .wmv.

EXAMPLE:
Code:
xbmovie /X:192.168.1.108 /F:3 myvideo1.wmv


7. Play whatever game you wish until you are ready to record. Once you are ready to record, press ENTER on your keyboard. When you wish to cease recording, press ENTER again. Allow time for the clip to be saved onto your laptop. Once clip has finished being saved onto your laptop, simply search for it by name to locate it as it may be saved in your temp folders or elsewhere on your C Drive.

Examples of my own recordings:


 
F

FUzIONZz16

Contributor
Messages
2,259
Reaction score
542
this is awesome i have seen people looking for this :smile: thanks
 
A

Atlas

Local Rivethead
VIP
Retired
Messages
16,688
Reaction score
13,816
This will only work for the Xbox 360 and not the Xbox one.
This only works for JTAG, RGH, and RGH2 consoles running hacked XDK software. Take a look at the OP :smile:
 
P

Professional

Staff
Staff
Messages
6,040
Reaction score
4,847
Thanks, almost wasted my money on an elgato.
 
S

shinda

Retired
Retired
Messages
2,353
Reaction score
1,379
It's unfortunate that this doesn't work with 4gb consoles. :frown:
 
X

XeX Destruction 30

Enthusiast
Messages
137
Reaction score
9
unable to connect to runtime on target machine ? why does it keep telling me that 
and when i try too replace my 444 with my ip address it says the filename, directory name, or volume label syntax is incorrect
 
A

Atlas

Local Rivethead
VIP
Retired
Messages
16,688
Reaction score
13,816
It's unfortunate that this doesn't work with 4gb consoles. :frown:
Yes it does. I've used both RGLoader and TX Fusion on my Trinity which has a 4GB internal.
unable to connect to runtime on target machine ? why does it keep telling me that 
and when i try too replace my 444 with my ip address it says the filename, directory name, or volume label syntax is incorrect
Are you using TX Fusion or RGLoader?

Great tutorial!
Glad you enjoy it! :biggrin:
 
S

shinda

Retired
Retired
Messages
2,353
Reaction score
1,379
Yes it does. I've used both RGLoader and TX Fusion on my Trinity which has a 4GB internal.

Are you using TX Fusion or RGLoader?


Glad you enjoy it! :biggrin:
There isn't support for my corona v2 is what I meant. I've tried.
 
A

Atlas

Local Rivethead
VIP
Retired
Messages
16,688
Reaction score
13,816
There isn't support for my corona v2 is what I meant. I've tried.
Oh, I see, my apologies. I hadn't thought about what you meant. I thought RGLoader had added support for Corona's on their latest release. I could be mistaken though.
 
A

Atlas

Local Rivethead
VIP
Retired
Messages
16,688
Reaction score
13,816
No worries, I didn't even know Trinity's had 4gb.
Hey, well I still should have recalled that the latest version of RGLoader does not have Corona support.
 
J

JunniorDouglas

Newbie
Messages
29
Reaction score
2
TX Fusion or RGLoader's are compatible with existing dashboard?
16767
 
A

Atlas

Local Rivethead
VIP
Retired
Messages
16,688
Reaction score
13,816
TX Fusion or RGLoader's are compatible with existing dashboard?
16767
No. As i said in the OP, TX Fusion is based on an a pretty old dash and RGLoader is based on 16537
 
S

SubZero_nX

Enthusiast
Messages
113
Reaction score
11
So to do this i need to lower my dash to 16753 or something along those lines just to do this?
 
Top Bottom