Hello Se7ensins today I will be teaching you how to make a lag switch. It is very simple and can be done quickly. Anyone can make a lag switch including my 6 year old brother.Materials•Light switch•Ethernet Cable•Knife•Brain First your going to want to start off by getting your Ethernet cable.Your going to want to open it up with your knife and then find the orange wire.After you find the orange wire you will then want to cut the orange wire until you hit the copper wire,make sure you have a decent size of copper wire. After you find the copper wire you are going to want to take the screws off off your light switch.Do not take them completely off just screw then to were you can wrap your copper wire on it.Next you are going to wrap your copper wire onto your light switch wherever you unscrewed your screws.Screw then back on and enjoy your lag switch..Simple right? Tips on using your lag switch•Do not use longer than 8 seconds•Make sure your host when you use it•Be careful to not let the copper wire break If you need anymore help on your lag switch then just pm me on comment below.Hopefully you got everything to work and enjoy!