Reac7ionZ
Newbie
Things Needed:
Painters Tape
Any spraypaint that Bonds With Plastic
Step One
Remove the Faceplate from the Xbox 360 Console. And set it onto some newspaper
Step Two
Put the Painters Tape over where you Dont want the paint/Design to go.
Make SURE To Put tape over the black censor on the faceplate where the wireless controller connects. And also if you dont want the power button painted put tape over it
Step Three
After you have applied tape in a way as to Make the design you want, Stand about a foot or 2 away from the faceplate and proceed to spraypaint the faceplate with side to side movement, do NOT Keep the spraypaint on one area for a long amount of time and make it a light layer. After you have done that, let it dry for 30-45 Minutes
Step Four
After you have let it dry for 30-45 Minutes, add another layer of spray paint and let it dry again for 30-45 Minutes
Step Five
Repeat Step 5 Adding another layer of Spraypaint and letting it dry
Step Six
Remove the Tape and Examine your Results, If you are wanting it to beb multi colored apply paint to where you already spraypainted and repeat steps 1-6.
Extra Tips
If you want a cool effect, take a paint and a paintbrush and spalsh some paint droplets onto the faceplate, if you want you can let them drip down as this creates a cool affect.
I Hope You Like This Tutorial!
Pictures:
Painters Tape
Any spraypaint that Bonds With Plastic
Step One
Remove the Faceplate from the Xbox 360 Console. And set it onto some newspaper
Step Two
Put the Painters Tape over where you Dont want the paint/Design to go.
Make SURE To Put tape over the black censor on the faceplate where the wireless controller connects. And also if you dont want the power button painted put tape over it
Step Three
After you have applied tape in a way as to Make the design you want, Stand about a foot or 2 away from the faceplate and proceed to spraypaint the faceplate with side to side movement, do NOT Keep the spraypaint on one area for a long amount of time and make it a light layer. After you have done that, let it dry for 30-45 Minutes
Step Four
After you have let it dry for 30-45 Minutes, add another layer of spray paint and let it dry again for 30-45 Minutes
Step Five
Repeat Step 5 Adding another layer of Spraypaint and letting it dry
Step Six
Remove the Tape and Examine your Results, If you are wanting it to beb multi colored apply paint to where you already spraypainted and repeat steps 1-6.
Extra Tips
If you want a cool effect, take a paint and a paintbrush and spalsh some paint droplets onto the faceplate, if you want you can let them drip down as this creates a cool affect.
I Hope You Like This Tutorial!
Pictures: