What's new

Hardware Mods How to Make a Custom Xbox 360 Face Plate

  • Thread starter Reac7ionZ
  • Start date
  • Views 1,961
R

Reac7ionZ

Newbie
Messages
7
Reaction score
2
Things Needed:

Painters Tape
Any spraypaint that Bonds With Plastic


Step One
Remove the Faceplate from the Xbox 360 Console. And set it onto some newspaper

Step Two
Put the Painters Tape over where you Dont want the paint/Design to go.
Make SURE To Put tape over the black censor on the faceplate where the wireless controller connects. And also if you dont want the power button painted put tape over it

Step Three
After you have applied tape in a way as to Make the design you want, Stand about a foot or 2 away from the faceplate and proceed to spraypaint the faceplate with side to side movement, do NOT Keep the spraypaint on one area for a long amount of time and make it a light layer. After you have done that, let it dry for 30-45 Minutes

Step Four
After you have let it dry for 30-45 Minutes, add another layer of spray paint and let it dry again for 30-45 Minutes

Step Five
Repeat Step 5 Adding another layer of Spraypaint and letting it dry

Step Six
Remove the Tape and Examine your Results, If you are wanting it to beb multi colored apply paint to where you already spraypainted and repeat steps 1-6.


Extra Tips
If you want a cool effect, take a paint and a paintbrush and spalsh some paint droplets onto the faceplate, if you want you can let them drip down as this creates a cool affect.

I Hope You Like This Tutorial! :rolleyes:

Pictures:


 
R

rohly

rohly420
Retired
Messages
3,502
Reaction score
1,422
Nice Tut but do you have any pictures. I would like to see what some designs you have are.
 
X

TCX xVitalz

Keep Dreamin'
Messages
3,676
Reaction score
777
Pics make tutorials look 2x Better
If your faceplates look sexy then open up a shop
 
C

Crucifix

Enthusiast
Messages
471
Reaction score
23
Definitely pics are FTW.
 
X

TCX xVitalz

Keep Dreamin'
Messages
3,676
Reaction score
777
Not bad but more pictures would be alot better so people can see all of your work i sort of like the 1st pic would like to see more
 
R

Reac7ionZ

Newbie
Messages
7
Reaction score
2
Not bad but more pictures would be alot better so people can see all of your work i sort of like the 1st pic would like to see more


Thanxx Man.Ill Upload some more in a lil bit
 
X

TCX xVitalz

Keep Dreamin'
Messages
3,676
Reaction score
777
How much does it cost??? for premium
Prices Here: http://www.se7ensins.com/forums/index.php?app=subscriptions
Or you can click my sig all though you have to fill out surveys which is gay <_<
 
B

Ben

Enthusiast
Messages
931
Reaction score
34
I really like the yellow it'd look good on my xbox
 
B

Bill Gates

Enthusiast
Messages
146
Reaction score
10
To get the paint drip affect, put hot glue on it. I used to dye my lacrosse sticks to get that design, it's the same concept. then just peel off the glue
 
R

Reac7ionZ

Newbie
Messages
7
Reaction score
2
To get the paint drip affect, put hot glue on it. I used to dye my lacrosse sticks to get that design, it's the same concept. then just peel off the glue


Nice..Thanxx For Posting This so the others know
 
D

Duke Nukem

Enthusiast
Messages
57
Reaction score
1
To get the paint drip affect, put hot glue on it. I used to dye my lacrosse sticks to get that design, it's the same concept. then just peel off the glue

Bill Gates plays LAX
OHHHH SSSHHHHIIIIIIII...........
 
Top Bottom