Hardware Mods How to make a custom design on your controller with a sharpie!

[Comrade]

Sweet, anyway to erase mistakes?

Rub it off. If you spray lacquer or clear coat on it then touch it up.

 

[Dorney]

Rub it off. If you spray lacquer or clear coat on it then touch it up.

I might try this on a faceplate when i get sharpies

 

[Comrade]

I might try this on a faceplate when i get sharpies

Have not try that on a faceplate. Tell me how it goes.

 

[Dorney]

Will do

 

[Chazay]

Awesome! All i need is some Sharpies and Clearcoat.

Average time before actually gaming with these?

 

[Comrade]

Awesome! All i need is some Sharpies and Clearcoat.

Average time before actually gaming with these?

3o minuets

 

[Chazay]

3o minuets

Thanks +rep

 

[xPlatinum]

Good Tut keep it up.

 

[Bullets]

Today im going to show you how to make your very own custom xbox 360 controller design using only a sharpie and make it so it never rubs off!

iam not responsible if you wreck/mess up your controller!

Tools needed
Sharpie 1 fine point and 1 extra fine point(or a sharpie pen works)
Lacquer or a clear coat
optional Tape(only if you cant take apart your controller cover up the buttons,thumbsticks,ect...)

1st.Clean your controller then find the spot where you want to make your design

2nd. After your done making it (make sure to check if you made a smudge or missed a spot before you spray) lightly spray your lacquer/clear coat of your design(do this at least 2 time)

3rd. Thats its! make anything you want on that controller and simply spray lacquer/clear coat on it and your done! here is what I did.

If you have any questions please post here or pm me.

Dang man! You got some drawing skills. Nice Job!

 

[cheezin31]

I'm Not A Very Good Artist But,
Thanks Comrade!
http://danielarevans.net/Controller/Controller%20Pictures/BatteryAlone.html
http://danielarevans.net/Controller/Controller%20Pictures/controllerfull.html